Advertisement
uniquegardendecor.com
(866) 382-8600
DO NOT OPERATE EGGLIGHT UNLESS LIGHT IS COMPLETELY SUBMERSED
Use Egglight only in accordance with manufacturer's instructions attached to
PK140 pump (1)
Egglight (1)
#7 compression stopper (1)
Approx. 12" length of 1/2" Black non-kink tubing (1)
4mm Allen wrench (1)
Hose clamps (3) Note – Hose clamps can be used as
flow restrictor
FT-119 Echo Fountain
COMPONENTS AND PARTS LIST
Basin
FT-119A
14"l x 16"w x 64"h
333 lbs
Warning – Risk of Fire
DO NOT ALLOW POWER SUPPLY TO GET WET
Pump Kit Parts List
(2 pieces)
Disc
FT-119B
9.25"l x 10"w x 1"h
7 lbs
NOTE: Component drawings are not to scale
IN WATER!
the Egglight!
Tools you will need
Level
4mm Allen wrench (included)
This fountain uses cover FTNCOV-XLG
Revised May 24, 2012
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for YARDART FT-119 Echo Fountain
Summary of Contents for YARDART FT-119 Echo Fountain
- Page 1 FT-119 Echo Fountain (2 pieces) Revised May 24, 2012 COMPONENTS AND PARTS LIST uniquegardendecor.com (866) 382-8600 Basin FT-119A 14”l x 16”w x 64”h 333 lbs Disc FT-119B 9.25”l x 10”w x 1”h 7 lbs NOTE: Component drawings are not to scale Warning –...
- Page 2 FT-119 Echo Fountain (2 pieces) Revised May 24, 2012 ASSEMBLY INSTRUCTIONS 1. Make sure you are assembling your fountain on a level surface 2. Feed the pump and light cords through the hole in the basin leaving enough cord length inside basin to work with pump and light.
Need help?
Do you have a question about the FT-119 Echo Fountain and is the answer not in the manual?
Questions and answers