YARDART Corsini FT-171 Quick Start Manual

YARDART Corsini FT-171 Quick Start Manual

Wall fountain (2 pieces)

Advertisement

uniquegardendecor.com
(866) 382-8600
NOTE: Component photos are not to scale
PK120 pump (1)
#10 Compression stopper (1)
Approx. 6" length of 1/2" black non-kink tubing (1)
4mm Allen wrench (1)
Hose clamps (3)
Note – Hose clamp may be used as flow restrictor
FT- 171 Corsini Wall Fountain

COMPONENTS AND PARTS LIST

FT-171A
26.5"L x 16"W X 40.5" H
Lbs
FT-171B
9"L x 5.5"W X 5" H
6 Lbs
Pump Kit Parts List
(2 pieces)
Tools you will need
Level
4mm Allen wrench (included)
Revised May 24, 2012
Fountain holds approximately
5-10 gallon(s) of water
This fountain uses
cover FTNCOV-MED

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Corsini FT-171 and is the answer not in the manual?

Questions and answers

Summary of Contents for YARDART Corsini FT-171

  • Page 1 FT- 171 Corsini Wall Fountain (2 pieces) Revised May 24, 2012 COMPONENTS AND PARTS LIST uniquegardendecor.com (866) 382-8600 FT-171A 26.5”L x 16”W X 40.5” H FT-171B 9”L x 5.5”W X 5” H 6 Lbs NOTE: Component photos are not to scale Fountain holds approximately 5-10 gallon(s) of water This fountain uses...
  • Page 2 FT- 171 Corsini Wall Fountain (2 pieces) Revised May 24, 2012 ASSEMBLY INSTRUCTIONS 1. Make sure you are assembling your fountain on a level surface. 2. This fountain will need to be installed on a surface capable of holding a minimum of 375 pounds in approximately a 2 square foot area.

Table of Contents