YARDART Fonthill FT-272 Assembly Instructions

FT- 272 Fonthill in Basin Fountain
COMPONENTS AND PARTS LIST
FT-271A
6.75"dia x 13.5"H
22 lbs
FT-271B
20.25"dia x 7" H
41 lbs
FT-271C
9.25"dia x 14"H
38 lbs
FT-271D
5"L x 1.5"W x4. 5"H
2 lbs
FT-271E
29"dia x 9.5"H
94 lbs
FT-271F
13.5"W x 18"H
101 lbs
FT-271G
6.25"L x 1.5"W x 5.25"H
5 lbs
P-712
47"W x 26"H
535 lbs
FT-271H
24"W x 15"H
392 lbs
NOTE: Component photos are not to scale
(19 pieces)
This fountain uses cover
FTNCOV-MED but it does not
cover the basin
PK800 Pump (2)
#10 Rubber Stopper with large hole (1)
Plumber's putty (2)
Approx. 2" length of ¾" clear vinyl tubing (2)**
Approx. 2" length of 5/8" clear vinyl tubing (2)**
Approx. 72" length of ½" black non-kink tubing (2)**
**Tubing will be preassembled
Approx. 18" length of ½" black non-kink tubing (1)
13.5" length of 1½" PVC pipe to be used as stand pipe (1)
Rubber bands (1)
Hose clamps (5)
Wedges (10)
#7 Drain stopper with wing nut (2)
Basin plug (1)
Note – Hose clamps may be used for flow restrictor
FT-271I
7.75"L x 1.5"W x 7"H
15 lbs
FGB-2020
90" x 12"H
260 Lbs
Revised April 5, 2016
Fountain holds
approximately 240
gallons of water
Pump Kit Parts List
Tools you will need
Level
Tape measure
FT-124K (8)
38"L x 9"W x 15" H
282 Lbs