Advertisement
Quick Links
COMPONENTS AND PARTS LIST
FT-199A
10"L x 5"W x 3.5"H
11 lbs
Pump Kit Parts List
PK 180 Pump (1)
#7 compression stopper (1)
Approx. 8" length of ½" Black Non-Kink tubing (1)
Approx. 6" length of ½" Black Non-Kink tubing (1)
Hose clamps (5)
4mm Allen wrench (1)
2.8oz tube of silicone (1)
Copper "T" Connector (1)
Copper Spiller (1)
9" lengths of 3/8" rebar (2)
Note – Hose clamps may be used for flow restrictor
FT-199 Lucas Fountain
(4 pieces)
FT-199B
10"L x 5"W x 20"H
72 lbs
FT-199C
20.5"L x 10.75"W x 16"H
171 lbs
FT-199D
6"L x 12.5"W x 1"H
7 lbs
Revised May 24, 2012
This fountain
uses cover
FTNCOV-MED
NOTE: Component photos are not to scale
Tools you will need
Level
4mm Allen wrench (included)
uniquegardendecor.com
(866) 382-8600
Fountain holds
approximately 2.5
gallons of water
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for YARDART Lucas FT-199
Summary of Contents for YARDART Lucas FT-199
- Page 1 FT-199 Lucas Fountain (4 pieces) Revised May 24, 2012 COMPONENTS AND PARTS LIST FT-199A 10”L x 5”W x 3.5”H 11 lbs FT-199B 10”L x 5”W x 20”H 72 lbs FT-199C 20.5”L x 10.75”W x 16”H 171 lbs This fountain Fountain holds uses cover approximately 2.5 FTNCOV-MED...
- Page 2 FT-199 Lucas Fountain (4 pieces) Revised May 24, 2012 ASSEMBLY INSTRUCTIONS 1. Make sure you are assembling your fountain on a level surface. 2. This fountain will need to be installed on a surface capable of holding a minimum of 282 pounds in approximately a 1.5 square foot area.
Need help?
Do you have a question about the Lucas FT-199 and is the answer not in the manual?
Questions and answers