Advertisement
Quick Links
uniquegardendecor.com
(866)
866) 382-8600
6
NOTE: Component drawings are not to scale
PK120 pump (1)
Approx. 6" length of ½" black non-kink tubing (1)
Approx. 2" length of 5/8" clear vinyl tubing (1)
#10 rubber stopper (1)
Plumber's putty (1)
Wedges (2)
4mm Allen wrench (1)
Hose clamps (3)
Note – Hose clamps may be used as flow restrictor
FT-219 Borghese Fountain
(3 pieces)
COMPONENTS AND PARTS LIST
FT-219C
12.5" x 11.5"H
86 lbs
Pump Kit Parts List
FT-219A
5.25" x 10.5"H
5 lbs
FT-219B
25.5"L x 20"W x 11.25"H
52 lbs
Tools you will need
Level
4mm Allen wrench (included)
This fountain uses cover
Revised July 11, 2014
Fountain holds approximately
2.5 gallons of water
FTNCOV-MED
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for YARDART FT-219
Summary of Contents for YARDART FT-219
- Page 1 FT-219 Borghese Fountain (3 pieces) Revised July 11, 2014 COMPONENTS AND PARTS LIST uniquegardendecor.com (866) 866) 382-8600 FT-219A 5.25” x 10.5”H 5 lbs FT-219B 25.5”L x 20”W x 11.25”H 52 lbs FT-219C 12.5” x 11.5”H 86 lbs NOTE: Component drawings are not to scale Fountain holds approximately 2.5 gallons of water...
- Page 2 FT-219 Borghese Fountain (3 pieces) Revised July 11, 2014 ASSEMBLY INSTRUCTIONS 1. Make sure you are assembling your fountain on a level surface capable of holding a minimum of 165 pounds within a one square foot footprint. 2. Place the pedestal (FT-219C) into position where the fountain will be installed and ensure it is level.
Need help?
Do you have a question about the FT-219 and is the answer not in the manual?
Questions and answers