Advertisement
uniquegardendecor.com
(866) 382-8600
PK300 pump (1)
#10 compression stopper (1)
21" length of 1" copper pipe (1)
12" length of ½" Black Non-kink tubing (1)
NOTE – Hose clamps may be used as flow restrictor
FT-67 Anfora Fountain
COMPONENTS AND PARTS LIST
Copper Pipe
¾" male threaded
½" barb adapter
Non kink tubing
Pump
compression
stopper
NOTE: Component drawings are not to scale
Pump Kit Parts
¾" male threaded ½" barb adapter (1)
Wedges (4)
Hose clamps (3)
4mm Allen wrench (1)
(3 pieces)
FT-67A
31" x 18.5"W x 22.5"H
180 lbs
FT-67B
13.5"W x 5"H
30 lbs
Revised May 24, 2012
FT-67C
51"W x 33.5"L x 9"H
376 lbs
Tools you will need
Level
4mm Allen wrench (included)
This fountain uses cover FTNCOV-MED
Advertisement
Table of Contents
Related Manuals for YARDART Anfora FT-67
Summary of Contents for YARDART Anfora FT-67
- Page 1 FT-67 Anfora Fountain (3 pieces) Revised May 24, 2012 COMPONENTS AND PARTS LIST uniquegardendecor.com (866) 382-8600 Copper Pipe FT-67A 31” x 18.5”W x 22.5”H 180 lbs ¾” male threaded ½” barb adapter FT-67B 13.5”W x 5”H 30 lbs Non kink tubing Pump FT-67C 51”W x 33.5”L x 9”H...
- Page 2 FT-67 Anfora Fountain (3 pieces) Revised May 24, 2012 ASSEMBLY INSTRUCTIONS 1. Make sure you are assembling your fountain on a level surface. 2. Place the Basin (FT-67C) into position where the fountain will be installed. 3. Feed the pump cord through the hole in the basin leaving enough cord length to work with the pump. 4.
Need help?
Do you have a question about the Anfora FT-67 and is the answer not in the manual?
Questions and answers