Pressure Washer Operating Features - Delta D2750H Instruction Manual

PRESSURE WASHER
OPERATING FEATURES
PRESSURE ADJUSTMENTS
The pressure setting is preset at the
factory to achieve optimum pressure
and cleaning. If you need to lower the
pressure, it can be accomplished by
these methods.
1. Back away from the surface
to be cleaned. The further away
you are, the less the pressure will
be on the surface to be cleaned.
2. Change to the 40º nozzle -
(white) this nozzle delivers a less
powerful stream of water and a
wider spray pattern.
pressure. A higher pressure setting
than the factory set pressure may
damage pump.
3. Adjust the
pressure
regulator
on the
pump.
Turn the
pressure
regulator
knob coun-
terclock-
wise to lower pressure. Refer to
the illustrations to identify your
pressure regulator. Once you
have finished using your pressure
washer, return the pressure reg-
ulator to its original position by
turning it clockwise.
knob past the built-in stop or
damage to pump will result.
9- ENG
DO NOT attempt
to increase pump
DO NOT try to turn
pressure regulator
A09741