Cloning Procedures; Learning / Teaching A Master Tv Setup Using A Usb Memory Device - LG 323DCH - 32In Wide Lcd Hdtv Spk 1366X768 Hospital Grade Commercial Mode Setup Manual

Hospital tvs

Hide thumbs Also See for 323DCH - 32In Wide Lcd Hdtv Spk 1366X768 Hospital Grade:

Owner's manual (88 pages)

Table Of Contents

Table of Contents

USB Cloning Notes

Read the IMPORTANT CLONING INFORMATION on page 30 before beginning any cloning procedures.

•

You may edit a ﬁ lename as part of the Learning procedure; however, a ﬁ le with edited contents will not

•

be recognized.

It is not possible to clone a Master TV's clock using a USB memory device. Either set a Target TV's

•

clock manually or use the Auto Clock setting in the TV setup menus.

Learn Setup from Master TV

1. Ensure the Master TV is set up completely and in Pass-through Mode.

2. Plug the USB memory device into the USB IN port on the Master TV.

3. Press MENU to display the TV setup menus.

4. Use the arrow navigation keys to select/highlight the Option menu icon; then, press

the number "7" key a total of seven times to display the USB Download Menu.

5. To gain access to the Learn From TV option in the USB Download Menu, key in the

password used to enter the Installer Menu (Example: Press 9-8-7-6).

6. Use the Up/Down arrow keys to select Learn From TV, and then press OK (Enter).

7. To identify the proﬁ le from others, you can use the Up/Down arrow keys to change

the last ﬁ ve digits of the ﬁ lename. Press OK (Enter) when you are ready to initiate

Learning.

Learning status will be shown on the progress bar. When the Learning process is

complete, the USB Download menu will reappear on screen.

8. Remove the USB memory device from the Master TV.

Teach Master TV Setup to Target TV

1. Ensure the Target TV is in Pass-through Mode, and then plug the USB memory

device with the Master TV Setup ﬁ le into the Target TV USB IN port.

2. Press MENU to display the TV setup menus.

3. Use the arrow navigation keys to select/highlight the Option menu icon; then, press

the number "7" key a total of seven times to display the USB Download Menu.

4. Use the Up/Down arrow keys to select Teach To TV, and then press OK (Enter).

5. Use the Up/Down arrow keys to select/highlight the Master TV Setup you want to

install and press OK (Enter). Note: Filenames identify the TV and the TLL version

(see ﬁ gure at right).

Teaching status will be shown on the progress bar. When the Teaching process is

complete, the USB Download menu will reappear on screen.

6. When Teaching is done, remove the USB memory device, turn OFF the TV, and

unplug the TV power cord for 15 seconds.

7. Reconnect the TV power cord, and turn ON the TV. The Master TV Setup should

be resident on the Target TV.

206-4096

Learning / Teaching a Master TV Setup using a USB Memory Device