LG 323DCH - 32In Wide Lcd Hdtv Spk 1366X768 Hospital Grade Commercial Mode Setup Manual page 19

Hospital tvs
Hide thumbs Also See for 323DCH - 32In Wide Lcd Hdtv Spk 1366X768 Hospital Grade:
Table of Contents

Advertisement

Installer Menu Items 027 through 117
Menu Item Function
027
HOSPITAL MODE
028
CH. OVERIDE
029
OLD OCV
030
ACK MASK
031
POLL RATE
032
TIMING PULSE
034
CAMPORT EN
035
COMPPORT EN.
038
YPrPb EN.
039
REAR AUX EN
040
AUTO CAMPORT
046
STRT AUX SRCE
047
AUX STATUS
053
DIS. CH-TIME
069
EN. CH-T COL.
070
FOR. CH-TIME
071
BCK. CH-TIME
073
CH NOT AVBLE
075
REVERT CH
077
QUICK SHUTOFF
078
UPN MSB
079
UPN MSB-1
080
UPN MSB-2
081
UPN LSB
082
CHKSM ERROR
083
HANDSHK TIME
084
PERMANENT BLK
087
REAR RGB EN.
088
EN NOISE MUTE
090
KEY LOCK
094
SAP MENU EN
096
DEF. ASP. RATIO
099
BACK LIGHTING
102
ATSC BAND
103
ATSC TUNE MODE
104
START MINOR CH
106
ASP RATIO LOCK
116
VIDEO MUTE EN
117
FACT DEFAULT
*
Not applicable for 22LG3DCH/22LG3DDH.
206-4096
Value Range
Default Value
0 ~ 2 (LG3DCH)
2 (LG3DCH)
0 ~ 162, 254 (LG3DDH)
254 (LG3DDH)
0 / 1
1
0 / 1
0
0 / 1
0
20 ~ 169
94
186 ~ 227
207
*
1
0 / 1
0 / 1
1
*
1
0 / 1
0 / 1
1
*
1
0 / 1
**
6
1 ~ 4, 6, 255
0 / 1
0
0 / 1
0
0 / 1
1
0 ~ 7
2
0 ~ 7
2
0 / 1
0
0 / 1
0
0 ~ 17
0
0 ~ 255
0
0 ~ 255
0
0 ~ 255
0
0 ~ 255
0
0 / 1
1
0 ~ 5
5
0 / 1
0
*
2 (LG3DCH)
0/2/18 (LG3DCH)
*
1 (LG3DDH)
0/1/17 (LG3DDH)
0 / 1
1
0 / 1
0
0 / 1
1
0 ~ 4
2
1 ~ 100,
200 (LG3DCH)
101 ~ 200
100 (LG3DDH)
0 ~ 4
4
0 / 1
1
0 ~ 255
0
0 / 1
0
0 / 1
0
0 / 1
0
**
1, 3, 255 for 22LG3DCH/22LG3DDH
Brief Description of Function and Comments
For LG3DCH, set to 2 (default). For LG3DDH, set according to the pillow speaker power
supply, audio source, and brand. See detailed instructions.
If set to 0, limits direct access to favorite channels.
Set to 1 to change MPI operation to OCV.
If set to 1, changes MPI for some OCV boxes.
Selects poll rate for MPI.
Sets baud rate for MPI.
Set to 1 to enable Video 2 input.
Set to 0 to disable HDMI 1. Set to 1 enable HDMI 1.
Set to 1 to enable display panel Component Video 1 input jacks.
Set to 1 to enable display panel Video 1 input jack.
Set to 1 to automatically switch to Camport. If set to 1, STRT AUX SRCE
Sets the starting Aux source (if item 004 STRT CHANNEL is set to 0).
Set to 1 for MPI Aux source to be reported as a channel number instead of Channel 0.
Set to 1 to disable Channel-Time display.
Set to 1 to enable custom color for the Channel-Time display.
Chooses custom foreground color for the Channel-Time display.
Chooses custom background color for the Channel-Time display.
If set to 1 and Channel Override is 0, "NOT AVAILABLE" message is displayed when
directly accessing a channel not in the favorite Channel List.
If set to 1 and loss of MPI communication occurs, TV tunes to Start Channel.
Allows TV timed power Off press and hold setup with pillow speaker channel button.
User programmable number, most significant byte.
User programmable number, most significant byte - 1.
User programmable number, most significant byte - 2.
User programmable number, least significant byte.
Enforces rigid MPI checksum.
Relaxes MPI timing to be compatible with PC-based Windows-controlled systems.
Removes block hours setting for Parental Control and makes block permanent.
Set to 0 to disable RGB1. Set to 2 (LG3DCH) /1 (LG3DDH) to enable for RGB PC. Set
to 18 (LG3DCH) /17 (LG3DDH) for Auto detect configure.
If set to 1, audio is muted if no signal is present.
If set to 1, keyboard is locked out, IR is still functional.
Set to 0 to disable feature on Function Menu. Set to 1 to enable feature on Function Menu.
Sets default aspect ratio at power up. See detailed descriptions and item 106.
Sets the level of the TV picture back lighting. Settings above 101 control dynamic back
lighting and disable power savings mode.
Set to 1 (default) for Physical Channel scan. Set to 0 for Virtual Channel scan.
Selects Minor Start Channel. Set to 0 for NTSC.
To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on power cycle.
Set to 0 for Normal. Set to 1 for Blank.
Set to 0 for Normal. Set to 1 to load presets for all Installer Menu settings.
Installer Menu (Cont.)
cannot be set to 2.
Selects ATSC band.
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

22lg3dch26lg3dch32lg3dch22lg3ddh26lg3ddh32lg3ddh

Table of Contents