LG 22LG3DDH Owner's Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. LCD TV
  5. 22LG3DDH
  6. Owner's manual

LG 22LG3DDH Owner's Manual

Hide thumbs Also See for 22LG3DDH:
Table of Contents

Advertisement

Quick Links

See also: Setup Manual
OWNER'S MANUAL
LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
22LG3DDH
26LG3DDH
32LG3DDH
42LD6DDH
P/NO : SAC34026007 (1110-REV07)
www.lg.com

Advertisement

Table of Contents
loading

Related Manuals for LG 22LG3DDH

Summary of Contents for LG 22LG3DDH

  • Page 1 OWNER’S MANUAL LCD TV Please read this manual carefully before operating your set and retain it for future reference. 22LG3DDH 26LG3DDH 32LG3DDH 42LD6DDH www.lg.com P/NO : SAC34026007 (1110-REV07)
  • Page 2 This reminder is provided to call the CATV system Do not attempt to modify this product in any way installer’s attention to Article 820-40 of the without written authorization from LG Electronics. National Electric Code (U.S.A.). The code provides Unauthorized modification could void the user’s...
  • Page 3 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Protect the power cord from being walked on or Keep these instructions. pinched particularly at plugs, convenience receptacles, and the point where they exit from Heed all warnings. the apparatus. Follow all instructions. Do not use this apparatus near water.
  • Page 4 Never touch this apparatus or antenna during WARNING - To reduce the risk of fire or a thunder or lighting storm. electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch When mounting a TV on the wall, make sure the TV with wet hands.
  • Page 5 ANTENNAS Ventilation Outdoor antenna grounding Install your TV where there is proper If an outdoor antenna is installed, follow the ventilation. Do not install in a confined space precautions below. An outdoor antenna system such as a bookcase. Do not cover the product Ground Clamp Antenna Lead in Wire should not be located in the vicinity of...

  • Page 6: Table Of Contents

    CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . 1 SOUND & LANGUAGE CONTROL SAFETY INSTRUCTIONS . . . . . . . . . . . . . 2 FEATURES OF THIS TV .

  • Page 7: Warning/Caution

    FEATURES OF THIS TV HDMI , the HDMI logo and High-Definition Manufactured under license from Dolby Multimedia Interface are trademarks or registered Laboratories. “Dolby “and the double-D symbol are trademarks of HDMI Licensing LCC." trademarks of Dolby Laboratories. USB IN USB port shall be used for software update by SERVUCE ONLY USB IN...

  • Page 8: Preparation

    (This feature is not scratches or discoloration. to maintain standards compliance. D-sub 15-pin cable available for all models.) 기준점 For 22LG3DDH For 26/32LG3DDH, 42LD6DDH Cable Management Clip Protection Cover (Refer to P.12) (Refer to P.11) 1.5V 1.5V 1,5Vcc 1,5Vcc 1.5V 1.5V...

  • Page 9: Front Panel Information

    NOTE: If your TV has a protection tape attached, remove the tape. And then wipe the TV with a cloth(If a polishing cloth is included with your TV, use it). For 22/26/32LG3DDH ENTER MENU ENTER INPUT MENU CHANNEL(+, -) INPUT Buttons 22LG3DDH Power/Standby Indicator ENTER Illuminates green when the set is switched on. MENU Remote Control Sensor VOLUME (+, -) INPUT Buttons POWER Button...

  • Page 10: Back Panel Information

    ANTENNA IN M.P.I. M.P.I. ANTENNA IN BACK PANEL INFORMATION Image shown may differ from your TV. For 22LG3DDH ANTENNA IN M.P.I. HDMI/DVI IN PILLOW SPEAKER AV IN RESET ANTENNA IN M.P.I. UPDATE RS-232C IN (SERVICE ONLY) HDMI/DVI IN PILLOW PILLOW...
  • Page 11 Used for PC/DTV audio input jack(Only PILLOW SPEAKER IR output for controlling an auxiliary device. 22LG3DDH-UA model). PILLOW SPEAKER AV I SPEAKER OUT 8 Ω (Except 22LG3DDH model) HDMI/DVI IN RESET UPDATE Digital Connection. SPEAKER SWITCH RS-232C IN AUDIO IN M.P.I...

  • Page 12: Protection Cover

    PROTECTION COVER (FOR 26/32LG3DDH, 42LD6DDH) Image shown may differ from your TV. After removing the stand, install the included PROTECTION COVER over the hole for the stand. Press the Protection cover into the TV until you hear it click.

  • Page 13: Cable Management

    PREPARATION CABLE MANAGEMENT Image shown may differ from your TV. For 22LG3DDH For 26/32LG3DDH, 42LD6DDH Connect the cables as necessary. Connect the cables as necessary. To connect additional equipment, see the To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section.

  • Page 14: Desktop Pedestal Installation

    DESKTOP PEDESTAL INSTALLATION Image shown may differ from your TV. This feature is not available for all models. For proper ventilation, allow a clearance of 4 inches on all four sides. 4 inches 4 inches 4 inches 4 inches 4 inches CAUTION Ensure adequate ventilation by following the clearance recommendations.

  • Page 15: Vesa Wall Mounting

    LG is not liable for these kinds of accidents. LG is not liable for TV damage or personal injury when a non-VESA or non specified wall mount is used or the consumer fails to follow the TV installation instructions.

  • Page 16: Securing The Tv To The Wall To Prevent Falling When The Tv Is Used On A Stand

    SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND You should purchase necessary components to prevent TV from falling off of the stand. Image shown may differ from your TV. This feature is not available for all models. We recommend that you set the TV close to a wall so it cannot fall over if pushed backwards.

  • Page 17: Antenna Or Cable Connection

    PREPARATION To prevent damage, do not connect to the power outlet until all connections are made between the devices. ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connection. For optimum picture quality, adjust the direction if needed. Multi-family Dwellings/Apartments ANTENNA IN Wall...

  • Page 18: External Equipment Setup

    M.P.I RGB IN (PC) CONTROL O (RGB/DVI) SERVUCE ONLY (SER Component Connection (Except 22LG3DDH) 1. How to connect Connect the video outputs (Y, P ) of the digital set-top box to the COMPONENT IN VIDEO jacks on the TV. Match the jack colors (Y = green, P...
  • Page 19 PILLOW /DVI IN SPEAKER USB IN USB IN RS-232C RS-232C HDMI/DVI IN HDMI/DVI IN SERVUCE ONLY SERVUCE ONLY UPDATE (SERVICE ON (SERVICE ON PILLOW SPEAKER RS-232C IN EXTERNAL EQUIPMENT SETUP (SERVICE ONLY) RGB IN (P RGB IN (P PILLOW NORMAL SPEAKER OUT VIDEO VIDEO...
  • Page 20 VIDEO AUDIO CONTROL OUT CONTROL OUT SPEAKER AUDIO SPEAKER 1. How to connect (RGB/DVI) (RGB/DVI) (RGB/DVI) CONTROL OUT 22LG3DDH USB IN REMOTE SPEAKER SWITCH RS-232C IN AUDIO IN RGB IN (PC) CONTROL OUT (RGB/DVI) SERVUCE ONLY (SERVICE ONLY) UPDATE UPDATE...

  • Page 21: Dvd Setup

    SPEAKER AUDIO SPEAKER (RGB/DVI) USB IN SPEAKER SWITCH AUDIO IN M.P.I RGB IN (PC) CONT (RGB/DVI) SERVUCE ONLY Component Connection (Except 22LG3DDH) 1. How to connect  C onnectthevideooutputs(Y,P )oftheDVDto theCOMPONENT IN VIDEOjacksontheTV.Match thejackcolors(Y=green,P =blue,andP =red). RESET RESET UPDATE UPDATE...
  • Page 22 PILLOW /DVI IN SPEAKER USB IN USB IN RS-232C IN RS-232C IN HDMI/DVI IN HDMI/DVI IN SERVUCE ONLY SERVUCE ONLY UPDATE (SERVICE ONLY) (SERVICE ONLY) PILLOW SPEAKER RS-232C IN (SERVICE ONLY) RGB IN (PC) RGB IN (PC) PILLOW NORMAL SPEAKER OUT VIDEO VIDEO AUDIO IN...

  • Page 23: Vcr Setup

    EXTERNAL EQUIPMENT SETUP VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all TVs and is not covered by warranty.
  • Page 24 If connected to AV IN 2, select input source on the ANT IN OUTPUT SPEAKER OUT SPEAKER OUT AUDIO IN AUDIO IN REMOTE REMOTE TV(Except 22LG3DDH). SWITCH AUDIO (RGB/DVI) (RGB/DVI) CONTROL OUT CONTROL OUT Camcorder RESET UPDATE RESET UPDATE 42LD6DDH NOTE...

  • Page 25: Other A/V Source Setup

    AUDIO AUDIO VIDEO VIDEO ( MONO ) MONO MONO OUTPUT OUTPUT ANT IN SWITCH SWITCH ANT OUT button on the remote control. (Except 22LG3DDH) PILLOW PILLOW AUDIO AUDIO UPDATE UPDATE M.P.I M.P.I RGB IN (PC) RGB IN (PC) SPEAKER SPEAKER...

  • Page 26: Pillow Speaker Setup

    Keep pendant control away from oxygen equipment.” Controlling the TV with Serial Data The TV is capable of being controlled by a single-wire, serial data signal. This is a LG patented technology and is being implemented by certain brands of “smart” pillow speakers. Pillow Speaker Interface This connector furnishes three control lines and an audio output.

  • Page 27: Pc Setup

    EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15-pin) Connection (Except 22LG3DDH) ANTENNA IN 1. How to connect RGB IN (PC) VIDEO VIDEO AUDIO...
  • Page 28 VIDEO AUDIO CONTROL OUT CONTROL OUT SPEAKER AUDIO SPEAKER 1. How to connect (RGB/DVI) (RGB/DVI) (RGB/DVI) CONTROL OUT 22LG3DDH USB IN REMOTE SPEAKER SWITCH RS-232C IN AUDIO IN RGB IN (PC) CONTROL OUT (RGB/DVI) SERVUCE ONLY (SERVICE ONLY) UPDATE UPDATE...

  • Page 29: Screen Setup For Pc Mode

    EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode (Except 22LG3DDH) Selecting Resolution You can choose the resolution in RGB-PC mode. The Position, Phase, and Size can also be adjusted. SCREEN Move Prev. PICTURE Move Enter 1024 x 768 Resolution • Contrast 1280 x 768 •...
  • Page 30 Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. SCREEN Move Prev. PICTURE Move Enter Resolution •...
  • Page 31 EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. SCREEN Move Prev.
  • Page 32 Screen Reset (Reset to original factory values) Returns Position, Size, and Phase to the default factory settings. This feature operates only in RGB-PC mode. SCREEN Move Prev. PICTURE Move Enter Resolution • Contrast • Brightness 50 Auto Config. • Sharpness 70 To Set Position •...

  • Page 33: Watching Tv / Channel Control

    WATCHING TV / CHANNEL CONTROL WATCHING TV / CHANNEL CONTROL TURNING ON THE TV First, connect the power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the button on the TV or press POWER button on the remote control.

  • Page 34: Initial Setting

    TV. It will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus. Installer Menu Wizard WELCOME! Thank you for choosing LG Data loading... 96% PTC: V1.00.006 CPU: V01.17.00 FPGA: 20E7 Selecting Menu Mode...
  • Page 35 WATCHING TV / CHANNEL CONTROL Step3. Pillow Speaker Installer Menu Wizard ► ► ► ► ► ► Step3. Pillow Speaker Select Pillow Speaker Code. Which brand pillow speaker code will you be using? ENTER ◄ Zenith code ► Select Next. Back Next PTC: V1.00.006 CPU: V01.17.00 FPGA: 20E7...

  • Page 36: On-Screen Menus Selection

    ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. CHANNEL PICTURE AUDIO Move Enter Move Enter Move Enter Auto Tuning Aspect Ratio : 16:9 Auto Volume : Off Manual Tuning Picture Mode : Standard Clear Voice II : On Channel Edit •...

  • Page 37: Channel Setup

    WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run this function if you change your residence or move the TV. Also, make sure to run this function with the antenna connected during TV broadcasting hours.

  • Page 38: Add / Delete Channel (Manual Tuning)

    Add / Delete Channel (Manual Tuning) If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. CHANNEL CHANNEL Move Enter Move Enter Auto Tuning Auto Tuning Manual Tuning Manual Tuning DIGITAL...

  • Page 39: Channel Editing

    WATCHING TV / CHANNEL CONTROL Channel Editing The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel Edit List are displayed in blue. When a channel number is deleted, it means that you will be unable to select it using button during TV viewing.

  • Page 40: Channel Label

    CHANNEL LABEL Choose preset labels for your channels. If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a channel even if you didn't preset a label for the channel. CHANNEL CHANNEL Move...

  • Page 41: Input List

    INPUT Select the desired input source. AV1-2: Select them to watch a VCR or other external equipment. For 22LG3DDH Component: Select it to watch DVD or a Digital set-top box. RGB-PC: Select it to view PC input. HDMI HDMI1-2: Select them to watch high definition devices.

  • Page 42: Picture Control

    PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. RGB-PC input source can only use 4:3 or 16:9 aspect ratio. 16:9 RATIO Press the RATIO button repeatedly to select the picture options.
  • Page 43 PICTURE CONTROL Set by program Zoom Selects the proper picture proportion to match Choose Zoom when you want to view the picture the source’s image. without any alteration. However, the top and bottom portions of the picture will be cropped. (4:3 4:3) Set By Program...

  • Page 44: Preset Picture Settings

    PRESET PICTURE SETTINGS Picture Mode - Preset There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually. PICTURE PICTURE Move Enter Move Enter Aspect Ratio : 16:9 Aspect Ratio : 16:9 Vivid Picture Mode : Standard...

  • Page 45: Manual Picture Adjustment - User Mode

    PICTURE CONTROL MANUAL PICTURE ADJUSTMENT - USER MODE Adjust the picture appearance to suit your preference and viewing situations. PICTURE Move Enter Aspect Ratio : 16:9 Picture Mode : Standard • BackLight 70 • Contrast • BackLight 80 • Brightness 50 Enter •...

  • Page 46: Picture Improvement Technology

    PICTURE IMPROVEMENT TECHNOLOGY Dynamic Contrast: Optimizes the contrast automatically according to the brightness of the reflection. Dynamic Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors. Noise Reduction: Removes interference up to the point where it does not damage the original picture. Gamma: High gamma values display whitish images and low gamma values display high contrast images.
  • Page 47 PICTURE CONTROL Set to warm to enhance hotter colors such as red, or set to cool to make picture Color Temperature bluish. Adjusts the contrast to keep it at the best level according to the brightness of the Dynamic Contrast screen.

  • Page 48: Picture Reset

    PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE PICTURE Move Enter Move Enter • Contrast • Contrast • Brightness 50 • Brightness 50 All picture settings will be resetted. Continue? • Sharpness 30 •...

  • Page 49: Demo Mode

    PICTURE CONTROL DEMO MODE Displays a slide show to explain the various features of this TV. OPTION OPTION Move Enter Move Enter Menu Language : English Menu Language : English Audio Language : English Audio Language : English Caption : Off Caption : Off Set ID...

  • Page 50: Sound & Language Control

    SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed.

  • Page 51: Clear Voice Ii

    SOUND & LANGUAGE CONTROL CLEAR VOICE II By differentiating the human sound range from others, it improves the sound quality of voices. AUDIO AUDIO Move Enter Move Enter Auto Volume : Off Auto Volume : Off Clear Voice II : On Clear Voice II : On •...

  • Page 52: Balance

    BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. AUDIO AUDIO Move Enter Move Enter Auto Volume : Off Auto Volume : Off Clear Voice II : On Clear Voice II : On • Level •...

  • Page 53: Preset Sound Settings (Sound Mode)

    SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. AUDIO AUDIO Move Enter Move Enter Auto Volume : Off Auto Volume : Off Clear Voice II : On...

  • Page 54: Sound Setting Adjustment - User Mode

    SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. AUDIO AUDIO Move Enter Move Enter Auto Volume : Off Auto Volume : Off Clear Voice II : On Clear Voice II : On •...

  • Page 55: Infinite Sound

    If you select “Clear Voice II - On”, Infinite Select Infinite Sound. Sound feature will not operate. Infinite Sound: Infinite Sound is a patented ENTER LG technology that solves the problem of Select On or Off. playing 5.1 multichannel content over two speakers. RETURN Return to the previous menu.

  • Page 56: Tv Speakers On/Off Setup

    TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. (Except Pillow Speaker, Speaker out 8Ω) In AV, Component, RGB and HDMI with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system or a Infinite System, turn off the TV’s internal speakers.

  • Page 57: Audio Reset

    SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO AUDIO Move Enter Move Enter • Level • Level Balance Balance Sound Mode : Standard Sound Mode : Standard Resetting audio configuration... •...

  • Page 58: Stereo/Sap Broadcast Setup

    STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. MONO STEREO If other languages available on the digital...

  • Page 59: Audio Language

    SOUND & LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV mode. OPTION OPTION Move Enter Move Enter Menu Language : English Menu Language : English English Audio Language...

  • Page 60: On-Screen Menus Language Selection

    ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. OPTION OPTION Move Enter Move Enter Menu Language : English Menu Language : English English Audio Language : English Audio Language : English Español Caption : Off Caption...

  • Page 61: Caption Mode

    SOUND & LANGUAGE CONTROL CAPTION MODE Caption must be provided to help people with hearing loss watch TV. This feature operates only in TV, AV1-2 mode. When selecting Off, Sub-menus for Analog, Select Caption On or Off. DTV, and Digital Option become disabled. Analog Broadcasting System Captions Captions provided to help people with hearing loss watch TV.

  • Page 62: Digital Broadcasting System Captions

    Digital Broadcasting System Captions Choose the language you want the DTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. OPTION OPTION Move...

  • Page 63: Caption Option

    SOUND & LANGUAGE CONTROL Caption Option Customize the DTV captions that appear on your screen. This function in only available when Caption Mode is set On. Custom OPTION OPTION Move Enter Move Enter Size Standard Menu Language : English Menu Language : English Font Font 1...

  • Page 64: Time Setting

    TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. TIME TIME Move...

  • Page 65: Manual Clock Setup

    TIME SETTING Manual Clock Setup If the current time setting is wrong, set the clock manually. TIME TIME Move Enter Move Enter Clock Clock Off Time : Off Off Time : Off Manual On Time : Off On Time : Off Year 2011 Sleep Timer...

  • Page 66: Auto On/Off Time Setting

    AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The Off Time function overrides the On Time function if they are both set to the same time. The TV must be in standby mode for the On Time to work. TIME TIME Move...

  • Page 67: Sleep Timer Setting

    TIME SETTING SLEEP TIMER SETTING The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. TIMER Press the TIMER button repeatedly to select the number of minutes. Sleep timer options: Off, 10, 20, 30, 60, 90, 120, 180, and 240 minutes.

  • Page 68: Parental Control / Ratings

    PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories.

  • Page 69: Lock System

    PARENTAL CONTROL / RATINGS Lock System Enables or disables the blocking scheme you set up previously. LOCK LOCK Move Enter Move Enter Lock System : Off Lock System : Off Set Password Set Password Block Channel Block Channel Movie Rating Movie Rating TV Rating-Children TV Rating-Children...

  • Page 70: Set Password

    Set Password Change the password by inputting a new password twice. LOCK LOCK Move Enter Move Enter Lock System : Off Lock System : Off Set Password Set Password * * * Block Channel Block Channel * * * * Movie Rating Movie Rating Confirm...

  • Page 71: Channel Blocking

    PARENTAL CONTROL / RATINGS CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block...

  • Page 72: Movie & Tv Rating

    MOVIE & TV RATING Movie Rating (MPAA) Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
  • Page 73 PARENTAL CONTROL / RATINGS TV Rating Children Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audi- ences in the TV Rating - sub menu, your children can view those programs.
  • Page 74 TV Rating General Based on the ratings, blocks certain TV programs that you and your family do not want to view. LOCK LOCK Move Enter Move Enter Lock System : Off Lock System : Off Set Password Set Password Block Channel Block Channel Movie Rating Movie Rating...

  • Page 75: Downloadable Rating

    PARENTAL CONTROL / RATINGS DOWNLOADABLE RATING This function operates only when TV has received Region5 Rating data. LOCK LOCK Move Enter Move Enter Lock System : Off Lock System : Off Humor Set Password Set Password Sport Block Channel Block Channel Cruelty Movie Rating Movie Rating...

  • Page 76: External Input Blocking

    Movie Rating HDMI HDMI1 TV Rating-Children HDMI2 TV Rating-General Downloadable Rating Close Close Close Input Block For 22LG3DDH For 26/32LG3DDH For 42LD6DDH MENU Select LOCK. .:/, ENTER PQRS WXYZ Input the password. &@ Select Input Block. ENTER Select input source.

  • Page 77: Appendix

    APPENDIX APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. The remote control Ensure that the batteries are installed with correct polarity (+ to +, - to -).
  • Page 78 The audio does not work. Press the VOL or VOLUME button. Sound muted? Press the MUTE button. Picture OK but No sound Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? No output from one Adjust Balance in menu option.

  • Page 79: Maintenance

    APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to keep the dust off your screen for a while.

  • Page 80: Product Specifications

    PRODUCT SPECIFICATIONS 22LG3DDH 26LG3DDH 32LG3DDH MODELS (22LG3DDH-UA) (26LG3DDH-UA) (32LG3DDH-UA) Dimensions 528 x 387.3 x 82.7 mm 663.3 x 449.8 x 105.0 mm 801.8 x 544.4 x 109 mm (Width x Height x Depth) 20.7 x 15.2 x 3.2 inches 26.1 x 17.7 x 4.1 inches 31.5 x 21.4 x 4.2 inches...

  • Page 81: Open Source License

    APPENDIX OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 making the program proprietary. To prevent this, we have made Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA it clear that any patent must be licensed for everyone's free use or not licensed at all.
  • Page 82 a) You must cause the modified files to carry prominent b) Accompany it with a written offer, valid for at least three notices stating that you changed the files and the date of years, to give any third party, for a charge no more than any change.
  • Page 83 APPENDIX on the Program), the recipient automatically receives a version, but may differ in detail to address new problems or license from the original licensor to copy, distribute or concerns. modify the Program subject to these terms and conditions. You may not impose any further restrictions on the Each version is given a distinguishing version number.
  • Page 84 END OF TERMS AND CONDITIONS Also add information on how to contact you by electronic and paper mail. How to apply these terms to your new programs If the program is interactive, make it output a short notice like If you develop a new program, and you want it to be of the this when it starts in an interactive mode: greatest possible use to the public, the best way to achieve this is to make it free software which everyone can...

  • Page 85: Gnu Lesser General Public License

    APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 To protect each distributor, we want to make it very clear that Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA there is no warranty for the free library. Also, if the library is Everyone is permitted to copy and distribute verbatim copies of modified by someone else and passed on, the recipients should this license document, but changing it is not allowed.
  • Page 86 the whole GNU operating system, as well as its variant, the 1. You may copy and distribute verbatim copies of the library's GNU/Linux operating system. complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program...
  • Page 87 APPENDIX library) on a volume of a storage or distribution medium does legally a derivative work. (Executable containing this object not bring the other work under the scope of this license. code plus portions of the library will still fall under Section 6.) Otherwise, if the work is a derivative of the library, you may distribute the object code for the work under the terms of 3.
  • Page 88 special exception, the materials to be distributed need not 11. If, as a consequence of a court judgment or allegation of include anything that is normally distributed (in either source patent infringement or for any other reason (not limited to or binary form) with the major components (compiler, kernel, patent issues), conditions are imposed on you (whether by and so on) of the operating system on which the executable...
  • Page 89 APPENDIX 14. If you wish to incorporate parts of the library into other END OF TERMS AND CONDITIONS free programs whose distribution conditions are incompatible with these, write to the author to ask for How to apply these terms to your new libraries permission.
  • Page 90 MOZILLA PUBLIC LICENSE Version 1.1 --------------- 1.Definitions. 1.10. “Original code” means source code of computer software code which is described in the source code notice required by exhibit as original code, and which, 1.0.1. “Commercial use” means distribution or otherwise making the covered code available to a third party.
  • Page 91 APPENDIX practice, sell, and offer for sale, and/or otherwise 3. Distribution Obligations. dispose of the original code (or portions there of). (c) the licenses granted in this section 2.1(a) and (b) 3.1. Application of license. are effective on the date Initial developer first The modifications which You create or to which you distributes original code under the terms of this contribute are governed by the terms of this license,...
  • Page 92 contact. If contributor obtains such knowledge after the in which you describe recipients' rights relating to the modification is made available as described in section covered code. You may distribute the executable 3.2, contributor shall promptly modify the LEGAL file in version of covered code or ownership rights under a all copies contributor makes available thereafter and license of your choice, which may contain terms...
  • Page 93 APPENDIX particular version of the license, you may always infringement claim (excluding declatory judgment continue to use it under the terms of that version. You actions) against initial developer or a contributor (the may also choose to use such covered code under the initial developer or contributor against whom you file terms of any subsequent version of the license such action is referred to as “Participant”) alleging that:...
  • Page 94 CODE,OR ANY SUPPLIER OF ANY OF SUCH PARTIES, 12. RESPONSIBILITY FOR CLAIMS. BE LIABLE TO ANY PERSON FOR ANY INDIRECT, As between initial developer and the contributors, each SPECIAL, INCIDENTAL, CONSEQUENTIAL party is responsible for claims and damages arising, DAMAGES OF ANY CHARACTER INCLUDING, directly or indirectly, out of its utilization of rights WITHOUT LIMITATION, DAMAGES FOR LOSS OF under this license and you agree to work with initial...
  • Page 95 The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. MODEL SERIAL...
  • Page 96 Note: Selected features shown within this guide may not be available on all models. EXPERIENCED INSTALLER Express Script Installer Menu Wizard pages 9 – 10 Custom Master TV Setup pages 11 – 14 Cloning Information pages 27 – 33 P/N: 206-4190 (Rev A) © Copyright 2011, LG Electronics U.S.A., Inc.
  • Page 97 • Consult the dealer or an experienced radio/TV technician for help. CAUTION: Do not attempt to modify this product in any way without written authorization from LG Electronics U.S.A., Inc. Unauthorized modification could void the user’s authority to operate this product.

  • Page 98: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Read these instructions. 17. Power Cord Caution: It is recommended that appliances be placed Keep these instructions. upon a dedicated circuit; that is, a single outlet circuit Heed all warnings. which powers only that appliance and has no additional outlets or branch circuits.
  • Page 99 IMPORTANT SAFETY INSTRUCTIONS 26. Do not touch the ventilation openings, as they may become (Continued from previous page) hot while the TV is operating. 22. Outdoor Antenna Grounding 27. If you smell smoke or other odors coming from the TV or If an outside antenna or cable system is connected to the hear strange sounds, unplug the power cord, and contact an product, follow the precautions below.
  • Page 100 Table of Contents Safety Warnings ....... . 2 References Important Safety Instructions ....3 – 4 Upgrading TV/PTC Software using a USB Memory Device.

  • Page 101: Tv Overview / Setup Checklist

    TV Overview / Setup Checklist TV Overview Using the Hospital TV, the patient has available the following entertainment options: Pillow speaker control of TV. SRS surround sound or infinite sound. • • Auxiliary inputs on side connections panel, if Digital captions. •...

  • Page 102: Commercial Mode Overview

    Commercial Mode Overview This document describes how to set up LG3DDH and LD6DDH TVs for Commercial Mode operation. There are two methods for configuring stand-alone TVs: either using the Express Script Installer Menu Wizard or the Custom Master TV Setup procedure as described in this document. These TV models also allow external control via the TV’s MPI port, and if a Free-To-Guest device is installed in the TV MPI card slot, the TV can be configured for FTG Mode.

  • Page 103: Installer Remote Control Typical Key Functions

    Installer Remote Control Typical Key Functions An LG Installer Remote similar to that shown below is required to set up and operate the TV. The LG Installer Remote illustrated below and throughout this document shows typical remote control functions and is provided for reference only.
  • Page 104 Express Script Installer Menu Wizard The Express Script Installer Menu Wizard guides you through the process of setting up the essential items for most hospital TV viewing applications and is displayed each time the TV is turned ON, unless it previously has been completed or exited.

  • Page 105: Express Script Installer Menu Wizard

    Express Script Installer Menu Wizard (Cont.) (Continued from previous page) 5. To allow channel access (default: Yes), you can simply select Next and Installer Menu Wizard ► ► ► ► ► ► press OK (Enter). Step 4. Channel Access To lock the channel lineup (after the Express Script is complete) and restrict Do you want to allow direct access to channels not in access to the TV setup menus, select the channel access field, and use the the channel list?

  • Page 106: Custom Master Tv Setup

    Custom Master TV Setup This section describes how to create a customized Master TV Setup for cloning purposes. Before You Begin It is recommended that you disconnect all Aux inputs if you intend to run Auto Tuning (Channel Search). • Under certain conditions, Auto Tuning is disabled if there is an Aux input active.

  • Page 107: Custom Master Tv Setup Procedure

    Custom Master TV Setup (Cont.) Custom Master TV Setup Procedure 1. Set Installer Menu items. This step provides specific instruction only on the Installer Menu HOSPITAL PTC INSTALLER MENU items that should be set on a Master TV. Refer to pages 15 to 21 for detailed information on all Installer Menu items.
  • Page 108 Custom Master TV Setup (Cont.) (Continued from previous page) 3. Run Auto Tuning. a) To search for all available analog and digital channels, go to the CHANNEL Move Enter Channel Menu, select the Auto Tuning option, and follow the on-screen instructions. Auto Tuning b) Use the Channel Edit option in the Channel Menu to edit the Manual Tuning...
  • Page 109 Custom Master TV Setup (Cont.) (Continued from previous page) 5. (Optional) Add Custom Channel and Aux Input Labels: DIGITAL 19-3 2-5-4 + MENU Mode MONO STEREO SAP Note: 2-5-4 + MENU Mode enables you to add/edit channel icons and custom text labels in the PTC once the Master TV Setup has WXYZ been transferred as described in the previous step.

  • Page 110: Installer Menu

    Installer Menu Use the Installer Menu to set up, change, or view operational settings. Refer to the table starting on the next page for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing. Accessing the Installer Menu 1.
  • Page 111 Set to 1 to enable display panel Video 1 input jack. Set to 1 to automatically switch to Camport. If set to 1, STRT AUX SRCE AUTO CAMPORT * 0 / 1 cannot be set to 2. Not applicable for 22LG3DDH. 206-4190...
  • Page 112 FACT DEFAULT 0 / 1 Set to 0 for Normal. Set to 1 to load presets for all Installer Menu settings. 1, 3, 255 for 22LG3DDH. Not applicable for 22LG3DDH. *** Applicable for 42LD6DDH only. Caution: Installer Menu settings may affect options available from the TV setup menus or the Function Menu.
  • Page 113 Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE NOTE: For items 007, 008, and 009 For legacy reasons, the scale used is 0 - 63. The PTC software Specifies entry sequence to the Installer Menu. will translate this to the 0 - 100 scale used by the TV.
  • Page 114 Installer Menu (Cont.) 012 - IR BANKS EN (IR Banks Enable) 023 - CAPTION LOCK For direct access to a particular channel bank. When enabled, you If set to 0, captions are OFF when the TV is turned ON. Set to 1 to use the caption setting configured before the TV was turned OFF can access a channel bank by inputting the IR code for the bank.
  • Page 115 2 = Video 2 4 = RGB 255 = Last Aux 078 - UPN MSB (UPN Most Significant Byte) User programmable number, most significant byte readable by MPI command. Note: Not linked to serial number. * Not applicable for the 22LG3DDH 206-4190...
  • Page 116 Menu is available (i.e., the TV is not in Stand-alone Mode). Set to assigned channel icons and custom text labels. 0 to disable SAP feature on Function Menu, if Function Menu is available. * Not applicable for the 22LG3DDH 206-4190...

  • Page 117: Channel Icons / Custom Text Labels (2-5-4 + Menu Mode)

    Channel Icons / Custom Text Labels (2-5-4 + MENU Mode) Changing Channel Icons and/or Adding or Editing Changing icons and/or adding or editing custom text labels Custom Text Labels in the Channel-Time Display can only be done if there are channels that have been transferred to the TV’s PTC either during the Express If there is no pre-assigned icon for a channel, you can add Script/Custom Master TV Setup (see pages 9 to 10 or...

  • Page 118: Channel Banks Setup

    Channel Banks Setup Channel Banks Overview Channel Banks enable institution administrators to create tiered channel programming on patient in-room TVs. Each channel bank may offer a custom channel lineup for a pre-determined fee. The top tier generally contains the most programming (premium, etc.), 2nd tier = lesser programming, 3rd tier = basic programming, etc.
  • Page 119 Channel Banks Setup (Cont.) Channel Banks Worksheets Use Channel Banks Worksheets (see page 26) to create channel status charts as part of the setup process. See also sample charts on page 25. On the channel status charts, show the status for each channel in all channel banks.
  • Page 120 Channel Banks Setup (Cont.) Inactive TV Setup To create an inactive TV display on Channel Bank 4, select NORMAL-DELETED for each channel in Channel Bank 4. When the TV is powered ON by the patient, an “Inactive TV Call Attendant” message will appear on the screen, and after a few moments the TV will turn itself OFF.

  • Page 121: Channel Banks Worksheet

    Channel Banks Worksheet Use this worksheet to plan your program packages. (Photocopy additional worksheets as needed.) Purpose Channel Number Purpose Channel Number Purpose Channel Number Purpose Channel Number 99 100 Purpose Channel Number 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Date _____________ Installer _____________________________________ Page ___ of ____ Location ______________________________________________________________________ 206-4190...

  • Page 122: Cloning Overview

    Cloning Overview IMPORTANT CLONING INFORMATION There are three options for cloning a Master TV Setup (including a TV that has been set up using the Express Script Installer Menu Wizard): Using a USB memory device • Using a TLL-1100A clone programmer •...

  • Page 123: Usb Cloning Procedure

    USB Cloning Procedure Learning / Teaching a Master TV Setup using a USB Memory Device USB Cloning Notes Read the IMPORTANT CLONING INFORMATION on page 27 before beginning any cloning procedures. • You may edit a filename as part of the Learning procedure; however, a file with edited contents will not •...

  • Page 124: Learning / Teaching A Master Tv Setup Using A Usb Memory Device

    USB Cloning Procedure (Cont.) Learning / Teaching a Master TV Setup using a USB Memory Device (Cont.) Teach Master TV Setup to Target TV 1. On the Target TV, if necessary exit the Express Script Installer USB Download Menu Menu Wizard, and then use the Installer Remote to enter the Target TV Installer Menu: Press MENU repeatedly until the on-screen Upgrade TV Software display of the TV setup menus no longer toggles, and then press...

  • Page 125: Clone Programmer Cloning Procedures

    Clone Programmer Cloning Procedures Learning / Teaching a Master TV Setup using a TLL-1100A Clone Programmer Caution: Do not connect a clone programmer to a PPV card installed in the Master or Target TVs, as this will damage the clone programmer and the PPV card. Cloning is accomplished using the TV/clone programmer MPI ports for TLL-1100A Clone...

  • Page 126: Learning / Teaching A Master Tv Setup Using A Tll-1100A Clone Programmer

    Since the TLL-1100A’s time cannot be set directly, the current time needs to (6) DISPLAY CLONE SETUP be copied from an LG TV equipped with an enabled MPI port. CLONE CLOCK = XX:XX After the time is copied to the TLL-1100A clone programmer, the current CLOCK = XX:XX time will be maintained and can then be transferred to another TV.

  • Page 127: Learning / Teaching A Master Tv Setup Using An Lt2002 Clone Programmer

    Clone Programmer Cloning Procedures (Cont.) Learning / Teaching a Master TV Setup using an LT2002 Clone Programmer Caution: Do not connect a clone programmer to a PPV card installed in the Master or Target TVs, as this will damage the clone programmer and the PPV card. Cloning is accomplished using the TV/clone programmer MPI ports for communication (see figure).
  • Page 128 Since the LT2002’s time cannot be set directly, the current time needs to be TO CHANGE MENU ITEMS, PRESS copied from an LG TV equipped with an enabled MPI port. CHANNEL KEYS OR DIGITS. After the time is copied to the LT2002 clone programmer, the current time will be TO EXECUTE ITEM, PRESS ON/OFF, maintained and can then be transferred to another TV.
  • Page 129 Reference: Upgrading TV/PTC Software using a USB Memory Device Checking the Software Versions Note: This function is not accessible on an LG3DDH HOSPITAL PTC INSTALLER MENU TV when the TV is not in Stand-alone Mode. Typical Installer Menu You can check the software versions of the TV by 000 INSTALLER SEQ accessing the Installer Menu with the Installer Remote: Press MENU repeatedly until the on-screen...
  • Page 130 Reference: Downloading a Splash Screen using a USB Memory Device Splash Screen Image File Guidelines The splash screen image must be a baseline (not progressive) JPEG. • USB Download Menu The image should be no larger than 1 MB. • Upgrade TV Software The ideal resolution for the LG3DDH image is 1366 x 768 pixels or •...

  • Page 131: Power Consumption Settings

    Reference: Power Consumption Settings The following tables assume Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 100). 22LG3DDH 26LG3DDH 32LG3DDH 42LD6DDH Item 099 Power Power Power Power Back Lighting Percent Percent Percent Percent Consumption...

  • Page 132: Tv Camport Auto Sense Operation

    Reference: TV Camport Auto Sense Operation (26/32LG3DDH and 42LD6DDH TVs Only) The Camport Auto Sense function is enabled when: CAMPORT (Side Video) Functionality Control 1. Installer Menu item 34 CAMPORT EN is set to 1 AND Item 034 Item 040 Side (AV IN 2) 2.
  • Page 133 0x08 0 (VIDEO) Computer Computer SVGA Rear SVGA Rear REAR RGB EN = 2 0x10 Computer Computer (COMPUTER) Rear Y/PrPb Y/UV Component YPrPb EN 0x40 Component 0 (VIDEO) Component Video Not applicable for 22LG3DDH. ** Applicable for LD6DDH only. 206-4190...

  • Page 134: Vesa Standard Tv Mounts

    Reference: VESA Standard TV Mounts General Guidelines: Choosing a Location for Installing a VESA Standard Mount To the right are some examples of VESA standard mounts. Since there are numerous types of stands and mounts available, only a few are shown here. Refer to the instruc- tions provided with the TV stand that will be used to mount the TV.

  • Page 135: Lg3Ddh Rear Jack Panel

    This stereo jack provides a mono speaker software updates, etc. fixed-level, 1 watt output (audio +, audio -, w/ground shield). Do NOT plug in a mono connector, as this may damage the TV. 22LG3DDH AUDIO/VIDEO IN HDMI/DVI IN PORT Connection for composite audio/video Connection for HDMI/DVI output from external device.

  • Page 136: Ld6Ddh Rear Jack Panel

    Reference: LD6DDH Rear Jack Panel RESET Initiates a hardware reset and switches the TV to standby. UPDATE Restricted to software updates. REMOTE CONTROL OUT IR output for controlling an SPEAKER OUT (8Ω) auxiliary device. Connect to 8 ohm self-powered speaker input. Intended for special applications, such as a powered bathroom speaker with volume control.

  • Page 137: Lg3Ddh Side Connections Panel / Rf Antenna & Mpi Connections

    Left audio input. VIDEO IN Connect to video output port on (Headphone Output external device (see Reference for 22LG3DDH) section, “TV Camport Auto Sense AV IN 2 Operation” for further information). RF Antenna & MPI Connections Antenna...
  • Page 138 Reference: LD6DDH Side Connections Panel / RF Antenna Connection Side Connections Panel USB IN Insert USB device for software updates or for picture/music entertainment, as applicable. A/V 2 Input Headphone Output Connect headphone to L/MONO-AUDIO-R IN this port. Connect to audio output jacks on external device.For only mono audio output, connect to Left audio input.

  • Page 139: Mpi Card Slot

    Reference: MPI Card Slot The MPI card slot is equipped with an RF jack for antenna/cable signal source connection. The slot is also available for installing a PPV card. Note: Turn the TV ON. If the Express Script Installer Menu Wizard is present on the display (e.g., this is the first time the TV has been turned ON), exit the Express Script before inserting the PPV card.
  • Page 140 Controlling the TV with Serial Data The TV is capable of being controlled by a single-wire, serial data signal. This is an LG patented technology and is being implemented by certain brands of “smart” pillow speakers. Controlling the TV with Mechanical Switches...

  • Page 141: Pillow Speaker Setup

    Dim room light. Bed Switch set to wrong bed. Set Bed Switch or update Installer Menu, as necessary. Wrong Installer Remote. Requires compatible Installer Remote. Contact your LG dealer. Picture Reception Normal picture, Audio muted. Press MUTE or use Volume Up key to increase sound level.

  • Page 142: Troubleshooting Flow Chart

    Troubleshooting (Cont.) Troubleshooting Flow Chart Controller Quick Check STATUS Plug into AC connected LED on PTC Power outlet. to AC Board Power? blinking? Cycle the power by removing and reconnecting the AC Power cord. Then, observe POWER LED on front of TV. POWER Bad Analog or LED lit?

  • Page 143: Commercial Mode Check

    Troubleshooting (Cont.) Commercial Mode Check Use this flowchart to determine whether the TV is currently in Commercial Mode. Press POWER on Installer Remote. connected Plug into AC TV turned to AC Power outlet. Power? Leave the TV set ON, and press MENU on the Installer Remote.

  • Page 144: Clone Programmer Troubleshooting

    Then redo Learn/Teach. (Learning usually takes about 90 seconds; Teaching usually takes 3 to 4 minutes.) Remote does not operate Wrong Installer Remote. Only use an LG Installer Remote to operate clone programmer clone programmer. with TV. Clone menu does not dis- MPI cord not connected.

  • Page 145: Channel Banks Setup Troubleshooting

    Troubleshooting (Cont.) Channel Banks Setup Troubleshooting CHANNEL PREVIEW - BANK 1 CH 011-001 NORMAL-ADDED Enter -> Change CC -> VCHIP Menu, Ch. Preview -> Exit Channel Banks Setup Menu Possible Cause Possible Solution Symptom Cannot change channel Channel Access was denied in Express Set CH.

  • Page 146: Glossary Of Terms

    Reference: Glossary of Terms A list of definitions for some of the words found in this guide 75 OHM RF CABLE COMPONENT VIDEO OUTPUT The wire that comes from an off-air Uses three wires for transporting three- Refers to the output jack that sends antenna or cable service provider.

  • Page 147: Document Revision History / Notes

    Document Revision History / Notes Document Revision History Date Description October 2011 Revision A: New document Product documentation is available online at: www.LGsolutions.com/products. From the Products page, select TVs, Systems & Solutions, then LCD TVs, then the applicable TV. Click the Literature & Downloads tab at the bottom of the TV page, and select the required document(s) from the Downloads list.
  • Page 148 For Customer Support/Service, please call: 1-888-865-3026 www.LGsolutions.com Marketed and Distributed in the United States by LG Electronics U.S.A., Inc. 1000 Sylvan Avenue, Englewood Cliffs, NJ 07632 206-4190 Revision A © Copyright 2011, LG Electronics U.S.A., Inc.

This manual is also suitable for:

32lg3ddh42ld6ddh26lg3ddh

Table of Contents