Cloning Procedures; Learning / Teaching A Master Tv Setup Using A Usb Memory Device - LG 37LG710H Owner's Manual

USB Cloning Notes
• Read the IMPORTANT CLONING INFORMATION on page 28 before beginning any cloning procedures.
• Do not remove the TV power cord or the USB memory device while Learning or Teaching, as doing so may
harm the USB memory device.
• You may edit a filename as part of the Learning procedure; however, a file with edited contents will not be rec-
ognized.
• Since clock data is copied into the USB memory device as numeric data, the time difference between Teaching
and Learning is not automatically adjusted. Either set the clock manually, or use the Auto Clock setting in the TV
setup menus.
Learn Setup from Master TV
1. Ensure the Master TV is set up completely and the EBL is in Pass-through Mode.
2. Plug the USB memory device into the USB IN port on the Master TV.
3. Press MENU to display the TV setup menus.
4. Use the arrow navigation keys to select/highlight the Option menu icon; then, press
the number "7" key a total of seven times to display the USB Download Menu.
5. To gain access to the Learn From TV option in the USB Download Menu, key in the
password used to enter the Installer Menu (Example: Press 9-8-7-6).
6. Use the Up/Down arrow keys to select Learn From TV and press ENTER.
7. To identify the profile from others, you can use the Up/Down arrow keys to change
the last five digits of the filename. Press ENTER when you are ready to initiate
Learning.
Learning status will be shown on the progress bar. When the Learning process is
complete, the USB Download menu will reappear on screen.
8. Remove the USB memory device.
Teach Master TV Setup to Target TV
1. Plug the USB memory device with the Master TV Setup file into the Target TV USB
IN port.
2. Press MENU to display the TV setup menus.
3. Use the arrow navigation keys to select/highlight the Option menu icon; then, press
the number "7" key a total of seven times to display the USB Download Menu.
4. Use the Up/Down arrow keys to select Teach To TV and press ENTER.
5. Use the Up/Down arrow keys to select/highlight the Master TV Setup you want to
install and press ENTER. Note: Filenames identify the TV and the TLL version (see
figure at right).
Teaching status will be shown on the progress bar. When the Teaching process is
complete, the USB Download menu will reappear on screen.
6. When Teaching is done, remove the USB memory device, turn OFF the TV, and
unplug the TV power cord for 15 seconds.
7. Reconnect the TV power cord, and turn ON the TV. The Master TV Setup should
be resident on the Target TV.
206-4137

Learning / Teaching a Master TV Setup using a USB Memory Device

Cloning Procedures

USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV
Learn From TV
Learn From TV
USB Download Menu
Select the file name and press OK to start
Upgrade TV Software
xxLD650H-UA00001.TLL
Upgrade PTC Software
Teach To TV
Previous
Learn From TV
!
Learn From TV
Learn From TV
USB Download Menu
UPGRADING...
Select the file name and press OK to start
Upgrade TV Software
xxLG710H-UA00001.TLL
Upgrade PTC Software
Do not unplug!
Teach To TV
Previous
Learn From TV
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV
Learn From TV
Teach To TV
xxLD650H-UA00001.TLL
Previous
!
Teach To TV
Teach To TV
UPGRADING...
xxLG710H-UA00001.TLL
50%
Do not unplug!
Previous
Enter
25%
Enter
Enter
Enter
29