Installer Menu
Use the Installer Menu to set up or change operational settings.
See more detailed descriptions of the Installer Menu items on the pages that follow.
Accessing the Installer Menu
Make sure the TV is ON. Using an Installer Remote, press MENU repeat-
edly until the on-screen setup menus lock up, and then press 9-8-7-6 + OK
(Enter) to access the Installer Menu.
The Installer Menu opens with item 000 INSTALLER SEQ 000. Use the Up/
Down arrow keys to sequence through the available menu items, or access
an item directly by keying in the line number and then pressing MENU. For
example, to access the SLEEP TIMER option, which is item 015, press 0-1-
5 + MENU. To change a setting, use the Left/Right arrow keys, or enter a
value directly. To save a setting, press OK (Enter).
Using the Installer Menu
Items 000 ~ 117 are immediately accessible upon entering the Installer Menu.
Refer to the table below for an overview of Installer Menu items, including item numbers, functions, ranges,
and default values. Installer Menu items not relevant to these TV series are not present on the Installer
Menu; therefore, some numbers are missing. For example, item 006 will not appear.
To exit the Installer Menu, press OK (Enter) again. Any changes you make will be stored in non-volatile
memory.
Installer Menu Items 000 through 025
Menu Item
Function
000
INSTALLER SEQ
001
POWER MANAGE
002
AC ON
003
BAND/AFC
004
STRT CHANNEL
005
CHAN LOCK
007
STRT VOLUME
008
MIN VOLUME
009
MAX VOLUME
010
MUTE DISABLE
011
KEY DEFEAT
012
IR BANKS EN.
013
SCAN MODE
014
STRT CH IN SM
015
SLEEP TIMER
016
EN TIMER
017
ALARM
020
FEATURE LEVEL
021
V-CHIP
022
MAX BLK HRS
023
CAPTION LOCK
025
FUNCTION PRE.
18
Value Range
Default Value
0 ~ 3
0
0 ~ 7
0
0 / 1
0
0 ~ 3
1
0 ~ 127, 255
255
0 / 1
0
0 ~ 63, 255
255
0 ~ 63
0
0 ~ 63
63
0 / 1
0
0 / 1
0
0 / 1
0
0 / 1
1
0 / 1
0
0 / 1
1
0 / 1
0
0 / 1
1
0 / 1
1
0 / 1
1
0 ~ 99
12
0 / 1
0
0 ~ 1
1
Brief Description of Function and Comments
Leave default set to 0.
Sets number of hours of no activity before automatic shutoff.
Set to 1 to enable Auto Turn On when AC power is applied.
Selects Tuning Band: 0=Broadcast, 1=CATV, 2=HRC, 3=IRC
Channel tuned when TV is turned On. (Set to 255 to tune to channel tuned
before TV turned Off.)
If set to 1, cannot tune from current channel.
Volume level when TV is turned On. (Set to 255 to use volume level
before TV turned Off.)
Sets minimum allowable volume setting.
Sets maximum allowable volume setting.
Set to 1 to disable Mute Function.
Set to 1 to disable menu navigation keys on display panel.
Set to 1 to enable TV to respond to IR code.
Typically used for hospitals: Enables On/Off in Channel Up/Down sequence.
Set to 1 to put TV On/Off below start channel number.
Set to 1 to enable Sleep Timer.
Set to 1 to enable On/Off Timers.
Set to 1 to enable Alarm.
Zen 1. Leave default set to 1 (1 Zen 1).
Set to 1 to enable V-Chip (Parental Control) functions.
Sets number of V-Chip blocking hours.
Set to 1 to retain caption setting before TV turned Off.
Controls channel preview in PPV function.
HOSPITAL PTC INSTALLER MENU
000
INSTALLER SEQ
UPN 000-000-000-000
FPGA E0F1
PTC V1.00.000
CPU V3.06.00
Typical TV Installer Menu
000
206-4096