Tv Camport Auto Sense Operation - LG 323DCH - 32In Wide Lcd Hdtv Spk 1366X768 Hospital Grade Commercial Mode Setup Manual

Reference: TV Camport Auto Sense Operation
(26/32LG3DCH and 26/32LG3DDH TVs Only)
The Camport Auto Sense function is enabled when:
1. Installer Menu item 34 CAMPORT EN is set to 1 AND
2. Installer Menu item 40 AUTO CAMPORT is enabled (1).
Selectable: Can be accessed with INPUT key, direct
access, etc.
Auto Sense: TV switches to this input when connector is
inserted. The Camport (Side [AV IN 2] Video) has the highest
priority and will override any commands including tuning to
the Start Channel.
Camport Operation (Stand-alone)
When Camport Auto Sense is enabled as above, the TV's
source will switch to the Side (AV IN 2) Video Aux source
whenever a plug is inserted into either of the AV IN 2 Video
inputs (either Composite Video or S-Video).
When the plug is removed, the TV will switch back to the
previous channel or input source that was being displayed
before the plug was inserted. However, if any direct access
to an RF channel or Aux channel is requested while the
Camport is active, then, when the video plug is removed,
the TV will switch to the last requested channel. Source
changes using any Source keys (INPUT) are ignored.
Channel Up/Down and Flashback commands are not direct
access tuning commands, and they are also ignored.
Camport Operation (PPV)
The operation will be similar to that of the Stand-alone
Mode. However, when the Channel Map is maintained
external to the PTC (i.e., PPV), Channel Up/Down or
Flashback keys are sent as Direct Access tuning com-
mands to the PTC/TV.
38
CAMPORT (Side Video) Functionality Control
Item 034
CAMPORT EN AUTO CAMPORT
0
0
1
1
Previous State Operation While
Before Inserting CAMPORT is
CAMPORT
Aux or RF
Channel
Aux or RF
Direct Access
Channel
Ch Up/Down,
Aux or RF
Flashback, and
Channel
Previous State Operation While
Before Inserting CAMPORT is
CAMPORT
Aux or RF
Channel
Aux or RF
Direct Access
Channel
Ch Up/Down,
Aux or RF
Flashback, and
Channel
Item 040 Side (AV IN 2)
Video Operation
0 Disabled
1 Disabled
0 Selectable
1 Auto Sense
State Upon
Removal of
Active CAMPORT
Previous Aux
None
or RF Channel
Last Requested
Aux or RF Channel
Previous Aux
or RF Channel
Input Keys
State Upon
Removal of
Active CAMPORT
Previous Aux
None
or RF Channel
Last Requested
Aux or RF Channel
Last Requested Aux
or RF Channel
Input Keys
206-4096