LG 323DCH - 32In Wide Lcd Hdtv Spk 1366X768 Hospital Grade Commercial Mode Setup Manual page 15

(Continued from previous page)
3. Run Auto Tuning (Channel Search). (continued)
b) Use the Channel Edit option in the Channel Menu to edit the channel
lineup, as necessary, to include free to guest channels only.
Add/delete channels per your system requirements. Note that
•
physical channel numbers are used to identify virtual channels.
Also, channel numbers cannot be higher than 255.
Use the Channel Label option in the Channel Menu to add familiar
•
channel trademarks/logos such as ABC, CBS, NBC, etc. to the
Channel-Time on-screen display. Identifi able labels (logos) should
enable the end user to readily know what common networks are
available. (You can add the channel labels in this step, or you can
add channel logos or labels for channels without icons in step 5.)
4. Transfer the TV Setup to the internal TV Controller (PTC):
2-5-5 + MENU Mode
After the TV channel lineup has been edited and channel label icons
added, enter the Installer Menu. Once in the Installer Menu, press
2-5-5 + MENU on the Installer Remote to initiate the transfer of the
Master TV Setup to the PTC. Once the transfer is complete, the TV
will exit the Installer Menu.
Note: The maximum number of active channels and Aux sources that
can be transferred is 141. Total channels numbering more than 141 will
result in erratic TV operation.
Note: Scan Mode is not functional until the TV setup is transferred.
5. Add Custom Channel and Aux Source Labels for Analog
Channels: 2-5-4 + MENU Mode
Enter the Installer Menu, and press 2-5-4 + MENU on the Installer
Remote. Add/edit custom text labels to channel on-screen displays.
Note that digital channels often have a broadcaster generated label
(see 2-5-4 + MENU procedural information on page 25). When you
are finished, press MENU to exit 2-5-4 + MENU Mode.
6. Verify the TV setup.
At this point, verify that the channel lineup, channel icons, and custom labels
are correct. Make sure the TV features are set per your requirements.
7. Set up channel banks.
Set up channel banks, as desired (see pages 26 to 29).
Note: When you lock the channel lineup (see next step), the Channel Banks
Setup Menu is no longer accessible via the Installer Remote. If you wish to set
up channel banks at a later time, you will need to set Installer Menu item 028
CH. OVERIDE to 001 to enable access to the Channel Banks Setup Menu.
8. (Recommended) Lock the channel lineup.
Enter the Installer Menu, and set item 028 CH. OVERIDE to 000 to lock the
channel lineup and restrict access to the TV setup menus.* Press OK (Enter)
to exit the Installer Menu and save your changes.
The Master TV Setup is now ready to be copied to a clone programmer (see
cloning information in this document).
206-4096
Commercial Mode Setup for Master TV (Cont.)
CHANNEL
Auto Tuning
Manual Tuning
Channel Edit
Channel Label
Run Auto Tuning, edit channels, and select
familiar channel trademarks/logos using
Channel Menu options.
DIGITAL 19-3
MONO STEREO SAP
WXYZ
Custom Text Label "WXYZ" created in
2-5-4 + MENU (Add Channel Label) Mode.
028 CH. OVERIDE
After verifying the TV Setup, set Installer
Menu item 028 CH. OVERIDE to 000.*
*
This step prevents end users from access-
ing channel settings (i.e., the Channel Menu
will be inaccessible/grayed out).
Move
Enter
000
15