LG 323DCH - 32In Wide Lcd Hdtv Spk 1366X768 Hospital Grade Commercial Mode Setup Manual page 17

(Continued from previous page)
Installer Menu Wizard
Step 4. Channel Access
Do you want to allow direct access to channels not in
the channel list?
►
Yes
Back
PTC: V1.00.004 CPU: V03.19.00 FPGA: 20E7
Installer Menu Wizard
Step 5. Auto Search
Would you like to scan for available channels?
Execute Auto Search
Back
PTC: V1.00.004 CPU: V03.19.00 FPGA: 20E7
Installer Menu Wizard
Step 6. Channel Map Edit
Would you like to edit channel map and icons?
Edit channel map.
Back
PTC: V1.00.004 CPU: V03.19.00 FPGA: 20E7
Installer Menu Wizard
Step 7. Completion
Easy installation complete.
Save data... 50%
PTC: V1.00.004 CPU: V03.19.00 FPGA: 20E7
206-4096
Express Script Installer Menu Wizard (Cont.)
5. To allow channel access (default: Yes), you can simply select Next and
1 2 ► ► 4 ► 5 ► 6 ► 7
► 3
press OK (Enter).
To lock the channel lineup (after the Express Script is complete) and restrict
access to the TV setup menus, select the channel access fi eld, and use the
Left/Right arrow keys to select "No." When you have made your selection,
►
use the arrow keys to select Next, and then press OK (Enter).
Note: It is recommended that you select the option to lock the channel
Next
lineup to prevent end users from accessing channel settings; i.e., the
OK Exit Express Script
Channel Menu will be inaccessible/grayed out.
6. Select Execute Auto Search (Auto Tuning) and press OK (Enter) to start
► ► ► ► ► ►
1 2 3 4 5 6 7
the channel scan (searches for all available analog and digital channels).
The system will display progress of the channel scan in a pop-up window.
When the scan is complete, press any key on the Installer Remote to
close the pop-up window. Use the arrow keys to select Next, and then
press OK (Enter).
Next
Note: If you do not execute the Auto Search as described above,
there will be no channels in the channel lineup (Channel Map).
Exit Express Script
OK
7. Press OK (Enter), if desired, to edit the Channel Map. Channel edit and
1 ► 2 ► 3 ► 4 ► 5 ► 6 ► 7
label and also channel bank setup options will be displayed in a pop-up
window. Use the arrow keys to navigate between fi elds and make any
necessary edits.
When you are fi nished, press MENU to close the pop-up window. Use the
arrow keys to select Next, and then press OK (Enter).
Note: See pages 26 to 29 for further information on channel banks. If the
Next
channel lineup will locked at the completion of the Express Script (see
OK Exit Express Script
step 5 above) and you wish to set up channel banks at a later time, you
will need to set Installer Menu item 028 CH. OVERIDE to 001 to enable
access to the Channel Banks Setup Menu.
► ► ► ►
1 ► 2 3 4 5 6 ► 7
For the fi nal step, the system will save your settings and transfer the setup to
the internal TV controller (PTC) (similar to 2-5-5 + MENU Mode). When this
step is complete, the system exits the Installer Menu Wizard.
OK Exit Express Script
(LG3DDH TVs only)
17