Mpi Card Slot - LG 323DCH - 32In Wide Lcd Hdtv Spk 1366X768 Hospital Grade Commercial Mode Setup Manual

Hospital tvs
Hide thumbs Also See for 323DCH - 32In Wide Lcd Hdtv Spk 1366X768 Hospital Grade:
Table of Contents

Advertisement

MPI Card Slot

The MPI card is equipped with an RF jack for antenna/cable signal source connection. The slot is also
available for installing a PPV card.
Note: (LG3DDH TVs only) Turn the TV On. If the Express Script Installer Menu Wizard is
present on the display (e.g., this is the first time the TV has been turned On), exit the
Express Script before inserting the PPV card.
MPI Card Removal / PPV Card Installation
1. Remove the two MPI card retainer screws.
2. Pull out the current MPI card far enough so that the RF cable can be detached from the old card.
3. Detach the RF cable.
4. Place the new PPV card into the slot and slide it in far enough to reconnect the RF cable.
5. Reconnect the RF cable.
6. Insert the card all the way into the slot making sure it is fully seated into the back plane connector.
7. Replace the two card retainer screws.
ANTENNA
/CABLE
MPI
10
RF CABLE
RF cable needs to be
disconnected to remove
current card.
206-4096

Advertisement

Table of Contents
loading

This manual is also suitable for:

22lg3dch26lg3dch32lg3dch22lg3ddh26lg3ddh32lg3ddh

Table of Contents