ZyXEL Communications NBG-5715 User Manual page 89

To change your NBG5715's MAC filter settings, click Network > Wireless LAN 2.4G/5G > MAC
Filter. The screen appears as shown.
Figure 47 Network > Wireless LAN 2.4G/5G > MAC Filter
The following table describes the labels in this menu.
Table 32 Network > Wireless LAN 2.4G/5G > MAC Filter
LABEL
MAC Address
Filter
Filter Action
MAC Filter Summary
Set
MAC Address
Apply
Cancel
NBG5715 User's Guide
DESCRIPTION
Select to turn on (Enable) or off (Disable) MAC address filtering.
Define the filter action for the list of MAC addresses in the MAC Filter Summary table.
This field is configurable only when you select Enable in the MAC Address Filter
field.
Select Allow to permit access to the NBG5715, MAC addresses not listed will be
denied access to the NBG5715.
Select Deny to block access to the NBG5715, MAC addresses not listed will be
allowed to access the NBG5715.
This is the index number of the MAC address.
Enter the MAC address of the wireless station that are allowed or denied access to
the NBG5715.
Click Apply to save your changes back to the NBG5715.
Click Cancel to reload the previous configuration for this screen.
Chapter 11 Wireless LAN
89