What You Need To Know; Ip Pool Setup; Lan Tcp/Ip - ZyXEL Communications NBG-5715 User Manual

Chapter 12 LAN

12.3 What You Need To Know

The actual physical connection determines whether the NBG5715 ports are LAN or WAN ports.
There are two separate IP networks, one inside the LAN network and the other outside the WAN
network as shown next.
Figure 54 LAN and WAN IP Addresses
The LAN parameters of the NBG5715 are preset in the factory with the following values:
• IP address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits)
• DHCP server enabled with 32 client IP addresses starting from 192.168.1.33.
These parameters should work for the majority of installations. If your ISP gives you explicit DNS
server address(es), read the embedded Web Configurator help regarding what fields need to be
configured.

12.3.1 IP Pool Setup

The NBG5715 is pre-configured with a pool of 32 IP addresses starting from 192.168.1.33 to
192.168.1.64. This configuration leaves 31 IP addresses (excluding the NBG5715 itself) in the
lower range (192.168.1.2 to 192.168.1.32) for other server computers, for instance, servers for
mail, FTP, TFTP, web, etc., that you may have.

12.3.2 LAN TCP/IP

The NBG5715 has built-in DHCP server capability that assigns IP addresses and DNS servers to
systems that support DHCP client capability.
96
NBG5715 User's Guide