Navigation Panel - ZyXEL Communications NBG-5715 User Manual

Chapter 8 Router Mode
Table 21 Status Screen: Router Mode (continued)
LABEL
- Memory Usage
Interface Status
Interface
Status
Rate
Summary
Packet Statistics
WLAN_2.4G Station
Status
WLAN_5G Station Status
IPSec VPN Status

8.2.1 Navigation Panel

Use the sub-menus on the navigation panel to configure NBG5715 features.
Figure 33 Navigation Panel: Router Mode
58
DESCRIPTION
This shows what percentage of the heap memory the NBG5715 is using.
This displays the NBG5715 port types. The port types are: WAN, LAN and WLAN.
For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up
or connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN
is disabled.
For the LAN ports, this displays the port speed and duplex setting or N/A when the
line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using
Ethernet encapsulation. This field displays N/A when the line is disconnected.
For the WLAN 2.4G/5G, it displays the maximum transmission rate when the WLAN
2.4G/5G is enabled and N/A when the WLAN is disabled.
Click Details... to go to the Monitor > Packet Statistics screen
page 40). Use this screen to view port status and packet specific statistics.
Click Details... to go to the Monitor > WLAN_2.4G Station Status screen
(Section 5.7 on page 41). Use this screen to view the wireless stations that are
currently associated to the NBG5715.
Click Details... to go to the Monitor > WLAN_5G Station Status screen
5.7 on page 41). Use this screen to view the wireless stations that are currently
associated to the NBG5715.
Click Details... to go to the Monitor > VPN Monitor screen
38). Use this screen to view the active VPN connections.
(Section 5.5 on
(Section
(Section 5.4 on page
NBG5715 User's Guide