General Screen; Advance Screen - ZyXEL Communications NBG-5715 User Manual

Chapter 19 Bandwidth Management
The sum of the bandwidth allotments that apply to the LAN interface (WAN to LAN, WAN to WLAN)
must be less than or equal to the Downstream Bandwidth that you configure in the Bandwidth
Management Advanced screen

19.4 General Screen

Use this screen to have the NBG5715 apply bandwidth management.
Click Management > Bandwidth MGMT to open the bandwidth management General screen.
Figure 87 Management > Bandwidth MGMT > General
The following table describes the labels in this screen.
Table 62 Management > Bandwidth MGMT > General
LABEL
Enable Bandwidth
Management
Apply
Reset

19.5 Advance Screen

Use this screen to configure bandwidth management rules for the pre-defined services or
applications.
You can also use this screen to configure bandwidth management rule for other services or
applications that are not on the pre-defined list of NBG5715. Additionally, you can define the source
and destination IP addresses and port for a service or application.
Note: The two tables shown in this screen can be configured and applied at the same
time.
148
Section 19.5 on page
DESCRIPTION
This field allows you to have NBG5715 apply bandwidth management.
Enable bandwidth management to give traffic that matches a bandwidth rule
priority over traffic that does not match a bandwidth rule.
Enabling bandwidth management also allows you to control the maximum or
minimum amounts of bandwidth that can be used by traffic that matches a
bandwidth rule.
Click Apply to save your customized settings.
Click Reset to begin configuring this screen afresh.
148.
NBG5715 User's Guide