ZyXEL Communications NBG-5715 User Manual page 168

Chapter 22 Maintenance
Restore configuration allows you to upload a new or previously saved configuration file from your
computer to your NBG5715.
Click Maintenance > Backup/Restore. Information related to factory defaults, backup
configuration, and restoring configuration appears as shown next.
Figure 107 Maintenance > Backup/Restore
The following table describes the labels in this screen.
Table 72 Maintenance > Backup/Restore
LABEL
Backup
File Path
Browse...
Upload
Reset
Note: If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default NBG5715
IP address (192.168.1.2). See
your computer's IP address.
168
DESCRIPTION
Click Backup to save the NBG5715's current configuration to your computer.
Type in the location of the file you want to upload in this field or click Browse... to
find it.
Click Browse... to find the file you want to upload. Remember that you must
decompress compressed (.ZIP) files before you can upload them.
Click Upload to begin the upload process.
Note: Do not turn off the NBG5715 while configuration file upload is in progress.
After you see a "configuration upload successful" screen, you must then wait one
minute before logging into the NBG5715 again. The NBG5715 automatically restarts
in this time causing a temporary network disconnect.
If you see an error screen, click Back to return to the Backup/Restore screen.
Pressing the Reset button in this section clears all user-entered
configuration information and returns the NBG5715 to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory defaults
of your NBG5715. Refer to the chapter about introducing the Web Configurator for
more information on the RESET button.
Appendix D on page 205 for details on how to set up
NBG5715 User's Guide