The Advanced Screen - ZyXEL Communications NBG-5715 User Manual

10.5 The Advanced Screen

To change your NBG5715's advanced WAN settings, click Network > WAN > Advanced. The
screen appears as shown. You can use this screen to enable multicast.
Figure 40 Network > WAN > Advanced
Table 25 Network > WAN > Advance
LABEL
Multicast Setup
Apply
Cancel
NBG5715 User's Guide
DESCRIPTION
Select IGMPv1/v2 to enable multicasting. This applies to traffic routed
from the WAN to the LAN.
Select None to disable this feature. This may cause incoming traffic to be
dropped or sent to all connected network devices.
Click Apply to save your changes back to the NBG5715.
Click Cancel to begin configuring this screen afresh.
Chapter 10 WAN
77