Network Map - ZyXEL Communications NBG-5715 User Manual

Chapter 7 Easy Mode
The following table describes the labels in this screen.
Table 13 Control Panel
ITEM
Home
Expert Mode
Logout

7.4 Network Map

Note: The Network MAP is viewable by Windows XP (need to install patch), Windows
Vista and Windows 7 users only. For Windows XP (Service Pack 2) users, you can
see the network devices connected to the NBG5715 by downloading the LLTD (Link
Layer Topology Discovery) patch from the Microsoft Website.
Note: Don't worry if the Network Map does not display in your web browser. This feature
may not be supported by your system. You can still configure the Control Panel
(Section 7.5 on page
want to use in the Expert Mode.
When you log into the Network Configurator, the Network Map is shown as follows.
Figure 21 Network Map
The line connecting the NBG5715 to the gateway becomes green when the NBG5715 is able to ping
the gateway. It becomes red when the ping initiating from the NBG5715 does not get a response
from the gateway. The same rule applies to the line connecting the gateway to the Internet.
You can also view the devices (represented by icons indicating the kind of network device)
connected to the NBG5715, including those connecting wirelessly. Right-click on the NBG5715 icon
to refresh the network map and go to the Wizard. Right click on the other icons to view information
about the device.
46
DESCRIPTION
Click this to go to the Login page.
Click this to change to Expert mode and customize features of the
NBG5715.
Click this to end the Web Configurator session.
47) in the Easy Mode and the NBG5715 features that you
NBG5715 User's Guide