ZyXEL Communications NBG-5715 User Manual page 62

Chapter 9 Tutorials
Log into NBG5715's Web Configurator and press the Push Button in the Configuration >
4
Network > Wireless LAN 2.4G > WPS Station screen.
Note: Your NBG5715 has a WPS button located on its front panel, as well as a WPS button
in its configuration utility. Both buttons have exactly the same function; you can
use one or the other.
Note: It doesn't matter which button is pressed first. You must press the second button
within two minutes of pressing the first one.
The NBG5715 sends the proper configuration settings to the wireless client. This may take up to
two minutes. Then the wireless client is able to communicate with the NBG5715 securely.
The following figure shows you an example to set up wireless network and security by pressing a
button on both NBG5715 and wireless client (the NWD210N in this example).
Figure 34 Example WPS Process: PBC Method
Wireless Client
62
WITHIN 2 MINUTES
SECURITY INFO
COMMUNICATION
Access Point
NBG5715 User's Guide