ZyXEL Communications NBG-5715 User Manual page 60

Chapter 8 Router Mode
Table 22 Navigation Panel: Router Mode (continued)
LINK
DHCP Server
NAT
Dynamic
DNS
Static Route
Security
Firewall
IPSec VPN
Management
Bandwidth
MGMT
Remote
MGMT
UPnP
MAINTENANCE
General
Password
Time
Firmware
Upgrade
Backup/
Restore
Language
60
TAB FUNCTION
General Use this screen to enable the NBG5715's DHCP server.
Advanced Use this screen to assign IP addresses to specific individual
computers based on their MAC addresses and to have DNS
servers assigned by the DHCP server.
Client List Use this screen to view information related to your DHCP status.
General Use this screen to enable NAT.
Port Use this screen to configure forward incoming service requests to
Forwaring the server(s) on your local network.
NAT Use this screen to change your NBG5715's port triggering
Advanced settings.
Dynamic DNS Use this screen to set up dynamic DNS.
Static Route Use this screen to configure IP static routes.
General Use this screen to activate/deactivate the firewall.
Services This screen shows a summary of the firewall rules, and allows you
to edit/add a firewall rule.
General Use this screen to display and manage the NBG5715's VPN rules
(tunnels).
SA Monitor Use this screen to display and manage active VPN connections.
General Use this screen to enable bandwidth management.
Advance Use this screen to set the upstream bandwidth and edit a
bandwidth management rule.
WWW Use this screen to configure through which interface(s) and from
which IP address(es) users can use HTTP to manage the
NBG5715.
Telnet Use this screen to configure through which interface(s) and from
which IP address(es) users can use Telnet to manage the
NBG5715.
UPnP Use this screen to enable UPnP on the NBG5715.
General Use this screen to view and change administrative settings such
as system and domain names.
Password Use this screen to change the password of your NBG5715.
Setup
Time Setting Use this screen to change your NBG5715's time and date.
Firmware Use this screen to upload firmware to your NBG5715.
Upgrade
Backup/ Use this screen to backup and restore the configuration or reset
Restore the factory defaults to your NBG5715.
Language This screen allows you to select the language you prefer.
NBG5715 User's Guide