Use Caller Id To Automatically Set Date And Time; Dial Mode; Website - AT&T TL92270 User Manual

Handset settings
Telephone settings

Use caller ID to automatically set date and time

You can choose to have the date and time automatically set
by incoming caller ID.
1. Press MENU/
the main menu.
CID or DIR to highlight Settings, then press
2. Press
/SELECT.
MENU
CID or DIR to highlight Set date/time, then
3. Press
/SELECT.
press
MENU
4. Press CID or DIR to select CID time sync, then press
/SELECT.
MENU
5. Press CID or DIR to select On or Off, then press
/SELECT to confirm. You hear a confirmation tone.
MENU

Dial mode

The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To change the setting:
1. Press MENU/
the main menu.
2. Press CID
/SELECT.
MENU
CID
3. Press
/SELECT.
MENU
Press CID or DIR to choose Tone or Pulse, then press
4.
/SELECT to confirm. You hear a confirmation tone.
MENU

Website

You can use this feature to view the AT&T website address.
Press MENU/
1.
the main menu.
2. Use CID or DIR to scroll to Website, then press
/SELECT. The handset screen shows the AT&T
MENU
website address.
3. Press OFF/
on the handset in idle mode to enter
SELECT
on the handset in idle mode to enter
SELECT
or DIR to highlight Settings, then press
or DIR to highlight Dial mode, then press
on the handset in idle mode to enter
SELECT
to exit.
CLEAR
31
SETTINGS
LCD language
Clr voicemail
Key tone
Set date/time
SET DATE/TIME
Date & time
CID time sync
CID TIME SYNC
On
Off
SETTINGS
Clr voicemail
Key tone
Set date/time
Dial mode
DIAL MODE
Tone
Pulse
Intercom
Bluetooth
Ringers
Settings
Website
www.telephones.
att.com