Page 4
MSA V-Gard H2 safety helmets comply with ANSI/ISEA Z89.1-2014 (R2019), TYPE II, CLASS E or C, HT, HV (HV only on Hi-Viz colors). If you have questions about the protection supplied by this helmet after you read these instructions, call MSA Customer Service at 1-800-MSA-2222 or visit www.MSAsafety.com/DoC.
Page 5
Do NOT let the helmet fall to the ground or use the helmet as a support. Clean the helmet regularly so sufficient inspection can be done. Use a solution of MSA's Confidence Plus® Cleaning Solution (P/N 10009971 or 10032737) or mild soap and warm water to clean the helmet assembly and sweat band.
Page 6
Heat, cold, chemicals, and sunlight have an effect on the electrical and mechanical properties of this helmet. V-Gard H2 Safety Helmets have a service life of 5 years, in addition to storage time. Helmets can be kept in storage for up to 2 years. Store helmet in a clean, dry environment, not in direct sunlight and not over 49⁰C (120⁰F).
Need help?
Do you have a question about the V-Gard H2 and is the answer not in the manual?
Questions and answers