Advertisement
IES7110 Series
Managed Industrial Ethernet Switch
Quick Installation Guide
3onedata Co., Ltd.
Address:
3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Song Bai Road, Nanshan
District, Shenzhen, 518108, China
www.3onedata.com
Website:
+86 0755-26702688
Tel:
+86 0755-26703485
Fax:
Package Checklist
Please check the integrity of package and accessories while
first using the switch.
1. Industrial Ethernet switch
2. DIN-Rail mounting attachment
3. Power line (only for AC device)
4. Warranty card
5. Certification
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
Product Overview
This series products are 100M/Gigabit managed DIN-Rail
industrial Ethernet switches. For convenience, the products of
this series adopt the following number on the left in this guide,
please confirm the number of your product:
Model I.
IES7110-8T2GS-2P48 (8 100M copper ports + 2
Gigabit SFP slots + 2 12~48VDC power supply
inputs) IES7110-8T2GS-P220 (8 100M copper ports
+ 2 Gigabit SFP slots + 1 220VAC/DC power supply
Model II.
input)
Model III. IES7110-6T2F2GS-2P48 (6 100M copper ports + 2
100M fiber ports + 2 Gigabit SFP slots + 2 12~48VDC power
supply inputs)
Model IV. IES7110-6T2F2GS-P220 (6 100M copper ports +2
100M fiber ports + 2 Gigabit SFP slots + 1 220VAC/DC power
supply input)
Model V. IES7110-4T4F2GS-2P48 (4 100M copper ports +4
100M fiber ports + 2 Gigabit SFP slots + 2 12~48VDC power
supply inputs)
Model VI. IES7110-4T4F2GS-P220 (4 100M copper ports +4
100M fiber ports + 2 Gigabit SFP slots + 1 220VAC/DC power
supply input)
Panel Design
Main view and right view
Model I
Model II
Model III
Advertisement
Table of Contents
Related Manuals for 3onedata Logicbus IES7110 Series
Summary of Contents for 3onedata Logicbus IES7110 Series
- Page 1 Model V. IES7110-4T4F2GS-2P48 (4 100M copper ports +4 100M fiber ports + 2 Gigabit SFP slots + 2 12~48VDC power supply inputs) 3onedata Co., Ltd. Address: 3/B, Zone 1, Baiwangxin High Technology Model VI. IES7110-4T4F2GS-P220 (4 100M copper ports +4...
- Page 2 Rear view, bottom view and top view Model III, V Model IV Model VI Rear view, bottom view and top view Model IV, VI Model I Indicators, from left to right in turn they are: Model V Rear view, bottom view and top view Running indicator (RUN) Alarm indicator (ALARM) Power indicator (P1/P2/PWR)
-
Page 3: Mounting Dimension
Power Supply Connection DIP switch Console port DC power supply Terminal blocks for relay alarm output (RELAY) Model I, Model III and Model V Grounding screw (M3) support redundant power input, Terminal blocks for DC power input (V1+, V1-, V2+, providing two power inputs, PWR1 V2-) and PWR2. -
Page 4: Specification
Relay Power supply is disconnected Device Status Alarm Contacts or running abnormally properly without triggering any Power supply or the port link is alarm alarming. Powered ALARM Power supply, port link without and working Closed alarm properly, but it triggered alarms The device is powering on or DIP Switch Settings the device is abnormal. - Page 5 ℃ Console port CLI command management Storage temperature Storage temperature: -40~60 port (RS-232), RJ45 Working humidity 5% 95% (no condensation) Alarm port 2-pin 7.62mm pitch terminal blocks, support 1 relay Protection grade IP40 (metal shell) alarm output, power load Disposal of Waste Electrical and Electronic capability is 1A@24VDC Equipment (WEEE 2012/19/EU) (Applicable in the EU-member states)
Need help?
Do you have a question about the Logicbus IES7110 Series and is the answer not in the manual?
Questions and answers