Sunsea AIoT SIMCom SIM7075G User Manual page 74

distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other
antenna or transmitter. End-users and installers must be provided with antenna installation instructions and
transmitter operating conditions for satisfying RF exposure compliance.
This Modular Approval is limited to OEM installation for mobile and fixed applications
only. The antenna installation and operating configurations of this Modular, including any
applicable source-based time averaging duty factor, antenna gain and cable loss must satisfy MPE categorical
Exclusion Requirements of 2.1091.
if the host is marketed so that end users do not have straight forward commonly used methods for access to remove
the module so that the FCC ID of the module is visible; then an additional permanent label referring to the enclosed
module: Contains Transmitter Module FCC ID: 2AJYU-8VC0004 or Contains FCC ID: 2AJYU-8VC0004 must be
used.
www.simcom.com
SIM7075G User Manual V1.00
74 / 74