HermanMiller Eames 3 Assembly Instructions

HermanMiller
Eames 3, 4 & 5 Column
®
Segmented Table Assembly
How to assemble your table.
Tools Required
3/8" 12 Point Socket Ratchet Wrench
or
#3 Phillips Screwdriver
Power Driver
Step 1 (Repeat for the other end)
1.1 Insert inner plate into column and hold in place.
1.2 Insert leg or spreader into inner plate and 3 position column, then attach with
lock washer and Bolt.
1.3 See top view for orientation of all columns. (Ref notch locations)
135°
Spreader
to Leg
Leg to Leg
HermanMiller for Eames Table
®
6" Extension
Torque Wrench
135°
Spreader
to Leg
90°
Parts Included
Oval Surface
Spider Spider Clamp
Leg
Part Quantity Chart
Product
Number
ET158, ET160,
3 3
ET161, ET162
ET164 4 4
ET166, ET168,
5 5
ET170
Step 1 (Cont.)
Typical 4 Position Column Spreader Allocation
Spreader
Orientation
Hole in Column
(Ref)
1 1BHPW5 rev C
*1BHPW5*
or
Rectangle Surface
Inner Plate Bolt
Column Spreader Screws
6 16 10 2 1
8 22 14 2 2
10 28 18 2 3
Spreader
Leg
Assembly Instructions
Lock Washer
2 12
3 16
4 20
Leg