Table of Contents
Advertisement
About the Connections
• Before making any connections, make sure that the power on all devices is switched OFF.
• After the devices have been connected, turn down the SH-01's VOLUME as well as
the volume of the audio devices (external sound system, etc.) connected to the SH-
01. Next, switch on the power of the devices in the following order: SH-01→sound
system. Reverse this order when you are ready to switch the power OFF.
Instrument/Microphone Connections
G Connecting an Instrument or Vocal Microphone
You can connect an electric guitar, electric/acoustic guitar, a dynamic type vocal microphone,
etc., to the INST. jack (standard monaural) located on the unit's rear panel.
Use the GAIN switch (HIGH/LOW) to adjust the input gain to match the output level of the
instrument or microphone.
The INPUT volume control on the top panel is used to adjust the input volume level of the
instrument/microphone.
* If the internal microphone is not going to be used, switch the INTERNAL MIC switch to its "OFF" position.
G Connecting a Line Level Instrument
Line level instruments such as a keyboard, synthesizer, electronic drum set, etc., can be con-
nected to the miniature stereo LINE IN jack located on the side panel of the SH-01.
The INPUT volume control on the top panel is used to adjust the input level of the instrument.
* If the internal microphone is not going to be used, switch the INTERNAL MIC switch to the "OFF" position.
14
Use the GAIN switch to optimize the SH-01's input gain with the out-
put level of the instrument or microphone.
• How to set the GAIN Switch
GAIN Switch
INST. jack being used
Using the built-in mic
HIGH
LOW
Vocal Mic
Guitar
Home recording
Recording loud vol-
umes in a studio, etc.
Advertisement
Table of Contents
