ZKTeco Horus E2 Series User Manual page 15

Horus E2 Series
1:1 Face Template Verification

This method verifies the face of the user captured by the camera with the facial template
related to that User ID provided by the user.

Tap on the Main interface to enter the 1:1 facial verification mode Input the User ID, tap
[OK].

If a user has registered a fingerprint, a password and card in addition to his/her face and the
verification method is set to fingerprint/ password/ card/ face verification, the following
screen will appear.

Tap on the face button

After the prompt "Please verify your face ", adjust your face in the center of the device screen
for face verification.
P a g e | 15
to enter the facial verification mode.
Copyright©2024 ZKTECO CO., LTD. All rights reserved.
User Manual