ZKTeco SC800 User Manual
  1. Manuals
  2. Brands
  3. ZKTeco Manuals
  4. IP Access Controllers
  5. SC800
  6. User manual
ZKTeco SC800 User Manual

ZKTeco SC800 User Manual

Hide thumbs Also See for SC800:
Table of Contents

Advertisement

Quick Links

Download this manual
Product Name and Model Number
M
a
User Manual
SC800
Date: November 2022
Doc Version: 1.1
English
Thank you for choosing our product. Please read the instructions
carefully before operation. Follow these instructions to ensure that the
product is functioning properly. The images shown in this manual are for
illustrative purposes only.
P a g e
| 1
n
For further details, please visit our Company's website
www.zkteco.com.
Copyright©2020 ZKTECO CO., LTD. All rights reserved.
u
a
U s e r
l

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SC800 and is the answer not in the manual?

Questions and answers

Related Manuals for ZKTeco SC800

Summary of Contents for ZKTeco SC800

  • Page 1 Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only. For further details, please visit our Company’s website www.zkteco.com. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 2 ZKTeco in no event shall be liable to the user or any third party for any incidental, consequential, indirect, special, or exemplary damages, including, without...
  • Page 3 ZKTeco periodically changes the information herein which will be incorporated into new additions/amendments to the manual. ZKTeco reserves the right to add, delete, amend, or modify the information contained in the manual from time to time in the form of circulars, letters, notes, etc.
  • Page 4 SC800 User Manual About the Company ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.
  • Page 5 The information which is significant. Care taken to avoid danger or mistakes. The statement or event that warns of something or that serves as a cautionary example. P a g e Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 6: Table Of Contents

    ONNECTION 5 MAIN MENU ...................... 25 6 USER MANAGEMENT ..................27 ................27 EGISTRATION 6.1.1 R ID....................... 27 EGISTER A 6.1.2 U ........................28 6.1.3 C ....................... 28 UMBER P a g e Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 7 ACTORY ESET 10 PERSONALIZE SETTINGS................55 10.1 ..................55 NTERFACE 10.2 ...................... 57 OICE 10.3 ..................57 CHEDULES 10.4 ................59 UNCH TATES PTIONS 10.5 ................61 HORTCUT APPINGS P a g e Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 8 ..............93 EVICE ON THE OFTWARE 18.3 .............. 94 ERSONNEL ON THE OFTWARE 19 CONNECT TO WEBSERVER ................95 19.1 ..................95 OGIN ERVER 19.2 ..................97 ORGOT ASSWORD P a g e Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 9 ANAGEMENT 19.15 ................114 PDATE IRMWARE 19.16 ................115 HANGE ASSWORD 19.17 ..................116 PERATION 19.18 ..............117 OWNLOAD IRMWARE 19.19 ................117 YSTEM NFORMATION ECO-FRIENDLY OPERATION ................120 P a g e Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 10: Safety Measures

    When the liquid spilled, or an item dropped into the system.  If exposed to water or due to poor weather (rain, snow, and more).  If the system is not operating normally, under operating instructions.  P a g e Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 11: Electrical Safety

     dismantle the device. Make sure that the signal connected to the device is a weak-current (switch)  signal; otherwise, components of the device will get damaged. P a g e | 10 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 12: Operation Safety

    Clean the device accessories with a piece of soft cloth or a small amount of cleaning agent. If you have any technical questions regarding usage, contact certified or  P a g e | 11 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 13 The warranty service does not cover accidental damage, damage caused by  incorrect operation, and damage due to independent installation or repair of the product by the user. P a g e | 12 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 14: Instructions For Use

    Fix the backplate on the wall using wall mounting screws. Place the device to the backplate. Mount the device to the backplate with the security screws. P a g e | 13 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 15: Standby Interface

    Enter any number to access the User ID input interface.  When there is no Super Administrator set in the device, tap M/OK to go to  the menu. P a g e | 14 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 16 For the specific operation method, please see "Shortcut Key Mappings." P a g e | 15 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 17: Verification Mode

    User ID registered in the device. Enter the user ID and tap M/OK to enter the 1:1 card verification mode. P a g e | 16 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 18: Password Verification

    The device compares the entered password with the registered password of the given User ID. Enter the user ID and tap M/OK to enter the 1:1 password verification mode. Then, input the user ID and tap M/OK. P a g e | 17 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 19: Combined Verification

    Combined Verification Symbol Definition Symbol Definition Explanation This method compares the entered verification of a person with the related verification template P a g e | 18 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 20 But, since the employee has only registered their password and not their  card, the verification process will not be successful, and the device will display "Verification Failed." P a g e | 19 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 21: Appearance

    SC800 User Manual Appearance Description Breathing Light 2.4-inch Color Screen Hidden Touch Keypad Speaker Reset Terminal Description P a g e | 20 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 22 Wiegand Out WD1-OUT INWD0 INWD1 Wiegand In 12V-OUT TX232 RS232 RX232 Lock Sensor / Exit Button / Auxiliary Input BELL+ Bell BELL- Alarm Network Interface 12V Power In P a g e | 21 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 23: Wiring Description

    Note: In LAN, the IP addresses of the server (PC) and the device must be in the same network segment when connecting to the software. P a g e | 22 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 24: Door Sensor, Exit Button, Alarm And Auxiliary Connection

    LOCK (normally unlocked when power-ON) is connected with 'NO' and 'COM' terminals, and the NC LOCK (normally locked when power-ON) is connected with 'NC' and 'COM' terminals. Take NC Lock as an example below: P a g e | 23 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 25: Wiegand Reader Connection

    Note: 485A and 485B can be connected to the Barrier gate or the 485 Reader, separately, but cannot be connected to the gate and reader at the same time. 4.6.6 RS485 Connection 4.6.7 RS232 Connection P a g e | 24 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 26: Main Menu

    To customize settings of User Interface, Voice, Bell Personalize Schedules, Punch State Options and Shortcut Key Mappings settings. Data Mgt. To delete, backup or restore the data. P a g e | 25 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 27 LCD Screen, Audio, Keyboard and Real-Time Clock. To view Privacy Policy, Data Capacity and Device System Info and Firmware information of the current device. P a g e | 26 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 28: User Management

    During the initial registration, you can modify your ID but not after the registration. If the message "Duplicated!" appears, you must choose a different User ID because the one you entered already exists. P a g e | 27 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 29: User Role

    Swipe the card underneath the card reading area on the Card interface. The  registration of the card will be successful. If the card has already been registered, the message "Error! Card already  P a g e | 28 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 30: Password

     6.1.5 Access Control Role The Access Control Role sets the door access privilege for each user. It includes the access group, verification mode and time period P a g e | 29 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 31: All Users

    On the All-Users interface, tap on the search bar on the user’s list to enter  the user ID and the system will search for the related user information. P a g e | 30 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 32: Edit User

    Delete Password Only: Deletes the password information of the selected  user. Delete Card Number Only: Deletes the card information of the selected  user. P a g e | 31 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 33: Display Style

    On the Main Menu, tap User Mgt., and then tap Display Style to enter Display Style setting interface. All the Display Styles are shown as below: Multiple Line: Mixed Line: P a g e | 32 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 34: User Role

    M/OK key. When assigning privileges the main menu function names will be displayed  on the left and its sub-menus will be listed on the right. P a g e | 33 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 35 User Role to assign the created roles to the required users. But if there is no super administrator registered in the Device, then the device will prompt "Please enroll super admin first!" when enabling the User Role function. P a g e | 34 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 36: Communication

    PC connect to the same network segment. Tap Ethernet on the Comm. Settings interface to configure the settings. P a g e | 35 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 37: Serial Comm

    Serial Comm Serial Comm function establishes communication with the device through a serial port (Master Unit/OSDP Output). Tap Serial Comm. on the Comm. Settings interface. P a g e | 36 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 38: Pc Connection

    Function Description Function Name Description The default password is 0 and can be changed. Comm Key The Comm Key can contain 1 to 6 digits. P a g e | 37 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 39: Wi-Fi Settings

    Once the Wi-Fi is turned on, the device will search for the available Wi-Fi  within the network range. Tap on the required Wi-Fi name from the available list and input the correct  P a g e | 38 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 40 Wi-Fi manually. network parameters. (The added network must exist.) Note: After successfully adding the WIFI manually, follow the same process to search for the added Wi-Fi name. P a g e | 39 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 41: Cloud Server Settings

    The Default Gateway address is 0.0.0.0. It can be Gateway modified according to the network availability. Cloud Server Settings Tap Cloud Server Settings on the Comm. Settings interface to connect with the ADMS server. P a g e | 40 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 42: Wiegand Setup

    It is used to set the Wiegand input and output parameters. Tap Wiegand Setup on the Comm. Settings interface to set up the Wiegand input and output parameters. P a g e | 41 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 43: Wiegand Input

    The default value is 1000 microseconds and can Pulse Interval(us) be adjusted within the range of 200 to 20000 microseconds. ID Type Select between the User ID and card number. P a g e | 42 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 44 18 to 33 bits. The 2 bits is the site codes, while the 10 to 25 bits are the card numbers. P a g e | 43 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 45 The 5 to 14 bits is the device codes, and15 to 20 bits are the site codes, and the 21 to 36 bits are the card numbers. P a g e | 44 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 46: Wiegand Output

    Its value can be 26 bits, 34 bits, 36 bits, 37 bits, Wiegand Format and 50 bits. After selecting the required Wiegand format, Wiegand Output Bits select the corresponding output bit digits from the Wiegand format. P a g e | 45 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 47: Network Diagnosis

    Tap Network Diagnosis on the Comm. Settings interface. Enter the IP address that needs to be diagnosed and tap Start the Diagnostic Test to check whether the network can connect to the device. P a g e | 46 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 48: System Settings

    Tap System on the Main Menu interface to get into its menu options. Access Control Terminal: Time Attendance Terminal: Date and Time Tap Date Time on the System interface to set the date and time. P a g e | 47 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 49 Date Mode When restoring the factory settings, the time (24-hour) and date format  (YYYY-MM-DD) can be restored, but the device date and time cannot be restored. P a g e | 48 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 50: Access Logs Settings And Attendance

    Access Log Alert space warning. Users may disable the function or set a valid value between 1 and 9999. P a g e | 49 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 51 Attendance Log Alert space warning. Users may disable the function or set a valid value between 1 and 9999. P a g e | 50 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 52: Card Management

    First tap on the required card type, and then select its required  sub-menus from the list. P a g e | 51 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 53: Device Type Settings

    Note: After changing the device type, the device will delete all the data and restart, and some functions will be adjusted accordingly. Security Settings Tap Security Settings on the System interface to go to the Security settings. P a g e | 52 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 54: Factory Reset

    (this function does not clear registered user data). Tap Reset on the System interface and then tap OK to restore the default P a g e | 53 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 55 SC800 User Manual factory settings. P a g e | 54 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 56: Personalize Settings

    Tap User Interface on the Personalize interface to customize the display style of the main interface. Function Description Function Name Description It helps to select the main screen wallpaper Wallpaper according to the user preference. P a g e | 55 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 57 This function can be disabled or set a value within 1 to 999 minutes. The style of the main screen can be selected Main Screen Style according to the user preference. P a g e | 56 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 58: Voice

    Adjust the volume of the device which can be Volume set between 0 to 100. 10.3 Bell Schedules Tap Bell Schedules on the Personalize interface to configure the Bell settings. P a g e | 57 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 59 1 to 999 seconds. All Bell Schedules:  Once the bell is scheduled, on the Bell Schedules interface, tap All Bell Schedules to view the newly scheduled bell. P a g e | 58 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 60: Punch States Options

    Punch State Mode Manual Mode: Switch the punch state key manually, and the punch state key will disappear after Punch State Timeout. Auto Mode: The punch state key will P a g e | 59 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 61 Select whether an attendance state needs to be selected after verification. ON: Attendance state needs to be selected after Punch State Required verification. OFF: Attendance state need not requires to be selected after verification. P a g e | 60 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 62: Shortcut Key Mappings

    If the Shortcut key is defined as a function key (such as New user, All users,  etc.), the configuration is completed as shown in the image below. P a g e | 61 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 63 OK to confirm, as shown in the image below. Note: When the function is set to Undefined, the device will not enable the punch state key. P a g e | 62 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 64: Data Management

    To delete the access records & attendance data & Attendance Data conditionally. To delete the information and access records & Delete All Data attendance data of all registered users. P a g e | 63 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 65: Backup Data

    11.2 Backup Data Back up the configuration data of the device to the device. Select the Backup Data option on the Data Mgt. interface. P a g e | 64 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 66: Restore Date

    Select Backup Start and tap M/OK.  11.3 Restore Date Restore the data stored on the device to the device. Select the Restore Data option on the Data Mgt. interface. P a g e | 65 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 67 SC800 User Manual Select the local configuration items to be restore to the device and save  the selected items. Select Backup Start and tap M/OK.  P a g e | 66 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 68: Access Control

    (and if there are other groups, being set in the same access combo, then the verification of those group’s members is also required to unlock the door). P a g e | 67 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 69: Access Control Options

    Tap Access Control Options on the Access Control interface to set the parameters of the control lock of the terminal and related equipment. Access Control Terminal: Time Attendance Terminal: P a g e | 68 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 70 Out: A record of verification on the master Master Device device is a check-out record. In: A record of verification on the master device is a check-in record. P a g e | 69 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 71 Reset Access Setting period, normal open time period, master device, and alarm. However, erased access control data in Data Mgt. is excluded. P a g e | 70 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 72 Door Alarm Delay(s) alarm will be triggered after a time period; this time period is the Door Alarm Delay (the value ranges from 1 to 999 seconds). P a g e | 71 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 73 Reset Access Setting period, normal open time period, master device, and alarm. However, erased access control data in Data Mgt. is excluded. P a g e | 72 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 74: Time Rule Settings And Time Schedule

    Time Zone number (maximum up to 50 zones). On the selected Time Zone number interface, tap on the required day (that is Monday, Tuesday, etc.) to set the time. P a g e | 73 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 75: Holidays

    Tap Holidays on the Access Control interface to set the holiday access. P a g e | 74 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 76 On the Holidays interface, select a holiday item to be modified. Tap Edit to modify holiday parameters. Delete a Holiday:  On the Holidays interface, select a holiday item to be deleted and tap Delete. P a g e | 75 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 77: Access Groups

    Tap Access Groups on the Access Control interface. Add a New Holiday:  Tap New Group on the Access Group interface. Note: The system has a default access group numbered 1, which cannot be P a g e | 76 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 78: Combined Verification

    ≤ 5 and the number of members N may all belong to one access group or may belong to five different access groups. Tap Combined Verification on the Access Control interface to configure the combined verification setting. P a g e | 77 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 79 AC Group 3, the second person is from AC Group 5, and the third person is from AC Group 8. Note: To delete the door-unlock combination, set all Door-unlock combinations to 0. P a g e | 78 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 80: Anti-Passback Setup

    Wiegand signal. The Wiegand format and Output type (User ID/Card Number) adopted by the master device and slave device must be consistent. Tap Anti-passback Setup on the Access Control interface. P a g e | 79 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 81: Duress Options Settings

    At the same time, a signal is sent to activate the alarm as well. On the Access Control interface, tap Duress Options to configure the duress settings. P a g e | 80 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 82 1 to 999 seconds. Set the 6-digit duress password. When the user Duress Password enters this duress password for verification, an alarm signal will be generated. P a g e | 81 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 83 [OFF] state, no alarm signal will be triggered. Alarm signal will not be transmitted until the Alarm Delay (s) alarm delay time is elapsed. The value ranges from 1 to 999 seconds. P a g e | 82 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 84: Attendance Search

    M/OK without entering any user ID. Once record search figure shows completes. Tap the record details of the selected highlighted in green to view record. its details. P a g e | 83 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 85: Work Code

    It is the digital code of the work code. Users may set a valid value between 1 and 99999999. It is the naming of the work code. Only supports Name input the numbers. P a g e | 84 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 86: All Work Codes

    In 1: N or 1:1 verification, the system will automatically pop up the following window. Select the corresponding Word Code manually to verify successfully. P a g e | 85 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 87 SC800 User Manual P a g e | 86 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 88: Autotest

    The terminal tests whether every key on the Test Keyboard keyboard works normally. Tap any key on the P a g e | 87 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 89 To test the RTC. The device tests whether the clock works normally and accurately with a Test Clock RTC stopwatch. Touch the screen to start counting and tap it again to stop counting. P a g e | 88 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 90: System Information

    Platform information, MCU Version, Manufacturer, and manufacture date. Displays the firmware version and other version Firmware Info information of the device. Privacy Policy Display the device's privacy policy. P a g e | 89 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 91: Connect To Zkbio Access Ivs Software

    Software side:  Login to ZKBio Access IVS software, click System > Communication > Communication Monitor to set the ADMS service port, as shown in the figure below: P a g e | 90 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 92: Add Device On The Software

    Click [Add] in operation column, a new window will pop-up. Select Icon type, Area, and Add to Level from each dropdown and click [OK] to add the device. P a g e | 91 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 93: Add Personnel On The Software

    Fill in all the required fields and click [OK] to register a new user. Click Access > Device > Device Control > Synchronize All Data to Devices to synchronize all the data to the device including the new users. P a g e | 92 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 94: Connect To Biotime 8.0 Software

    Click Device > Device > Add, to add the device on the software. A new window pops-up on clicking [Add]. Enter the required information about the device and click [Confirm], then the added devices are displayed automatically. P a g e | 93 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 95: Add Personnel On The Software

    Fill in all the required fields and click [Confirm] to register a new user. Click Device > Device > Data Transfer > Sync Data to Device to synchronize all the data to the device including the new users. P a g e | 94 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 96: Connect To Webserver

    (communication, access control and system functions, etc.), add users and upgrade the system. Open a browser and enter the address to log in to the WebServer; the Serial Address:1443. address https:// example: https://192.168.1.201:1443. P a g e | 95 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 97 Change Password. To retrieve the password easily, please register a super admin first, please refer to User Registration. P a g e | 96 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 98: Forgot Password

    The detailed steps are as follows: Click the icon on the login interface. On the pop-up page, enter the relevant information of the super admin user as prompted. P a g e | 97 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 99 After successfully logging in, please change your password for security reasons. Note: The super admin must exist. P a g e | 98 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 100 ZKBioTime8.0 User Manual. After the data synchronization is successful, you can reset the password with the newly registered super admin. The operation steps are the same as method 1. P a g e | 99 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 101: User Registration

    The default user ID can have 1 to 14 digits. A name can be up to 63 characters. The device Name only supports the input of numbers, you can add a user name by this method. P a g e | 100 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 102 ID once after the successful registration. If the message "Setup failed!" pops up, you must choose a different User ID because the one you entered already exists. P a g e | 101 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 103: Search For Users

    19.5 Edit User On the All Users interface, select the required user from the list and click Change User Info to edit the user information. P a g e | 102 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 104: Delete User

    On the All Users interface, select the required user from the list and click Delete User to delete the user. Here individual deletion and batch deletion is available. P a g e | 103 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 105: Comm

    The Default Gateway address is 0.0.0.0. It can be Gateway modified according to network availability. The default DNS address is 0.0.0.0. It can be modified according to network availability. P a g e | 104 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 106: Cloud Server Settings

    (when this mode is turned ON). Cloud Server IP address of the ADMS server. Disable Address Domain Name Port used by the ADMS server. Cloud P a g e | 105 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 107: Date Setup

    Click Manual to manually set the date and time and click Confirm to  save. Select Open or Close the Daylight Saving Mode function. If opened, set  the Daylight Saving Time and End of Daylight Saving. P a g e | 106 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 108: System

    SC800 User Manual 19.10 System Click System on the WebServer. It helps to set related system parameters to optimize the accessibility of the device. P a g e | 107 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 109: Serial Comm

    Then, until the device reboots and logs in again, WebServer will not display the changed language. 19.11 Serial Comm Click Serial Comm on the WebServer. P a g e | 108 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 110 Hence, a higher baudrate can be used when the communication distance is short; when the communication distance is long, choosing a lower baudrate is more reliable. P a g e | 109 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 111: Wiegand Setup

    Wiegand Format 50 bits and 60 bits. Wiegand Bits The number of bits of the Wiegand data. ID Type Select between the User ID and card number. P a g e | 110 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 112: Access Control Options

    (Door Sensor Delay), an alarm will be triggered. Door Sensor Delay (s) The valid value of Door Sensor Delay ranges from 1 to 255 seconds. P a g e | 111 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 113 Out: A record of verification on the slave device Slave Device is a check-out record. In: A record of verification on the slave device is a check-in record. P a g e | 112 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 114: Device Management

    Reset Note: After reset, the IP of the device is restored to the original 192.168.1.201, please refer to Communication Settings to modify the IP. P a g e | 113 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 115: Update Firmware

    Select an upgrade file and click Confirm to complete firmware upgrade operation. Note: If the upgrade file is needed, please contact our technical support. Firmware upgrade is not recommenced under normal circumstances. P a g e | 114 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 116: Change Password

    SC800 User Manual 19.16 Change Password Click Change Password on the WebServer. In this interface, you can change the password and reset the password of WebServer. P a g e | 115 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 117: Operation Log

    Click Operation Log on the WebServer. All the user’s operation records on the device or WebServer are saved. Users can search and download these logs by time. P a g e | 116 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 118: Download Firmware Logs

    In this interface, you can select download the main, biometric, or dev.log. 19.19 System Information Click System Information on the WebServer. In this interface, you can view the data capacity, device and firmware information of the current device. P a g e | 117 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 119 SC800 User Manual P a g e | 118 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 120 Displays the current device's user storage, Device Capacity password and card storage, administrators, attendance records. Displays the firmware version and other version Firmware Information information of the device. P a g e | 119 Copyright©2022 ZKTECO CO., LTD. All rights reserved.

  • Page 121: Eco-Friendly Operation

    ○ ○ ○ × Chip Inductor × ○ ○ ○ ○ ○ Diode ○ ○ ○ ○ ○ × component ○ ○ ○ ○ ○ × Buzzer P a g e | 120 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 122 Note: 80% of this product’s components are manufactured using non-toxic and eco-friendly materials. The components which contain toxins or harmful elements are included due to the current economic or technical limitations which prevent their replacement with non-toxic materials or elements P a g e | 121 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
  • Page 123 ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone: +86 769 - 82109991 Fax : +86 755 - 89602394 www.zkteco.com Copyright © 2022 ZKTECO CO., LTD. All Rights reserved. P a g e | 21 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

Table of Contents