ZKTeco SpeedFace-V5L Series User Manual

Hide thumbs Also See for SpeedFace-V5L Series:

User manual (91 pages)

Quick start manual (33 pages)

User manual (90 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

page of 126

/ 126
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Product Name and Model Number

User Manual

SpeedFace-V5L Series

Date: June 2022

Doc Version: 1.0

English

Thank you for choosing our product. Please read the instructions carefully

before operation. Follow these instructions to ensure that the product is

functioning properly. The images shown in this manual are for illustrative

purposes only.

P a g e

| 1

For further details, please visit our Company's website

www.zkteco.com.

User Manual

Table of Contents

Summary of Contents for ZKTeco SpeedFace-V5L Series

Page 1 Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only. For further details, please visit our Company’s website www.zkteco.com. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 2 Copyright © 2022 ZKTECO CO., LTD. All rights reserved. Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the "Company" or "ZKTeco").
Page 3 ZKTeco periodically changes the information herein which will be incorporated into new additions/amendments to the manual. ZKTeco reserves the right to add, delete, amend or modify the information contained in the manual from time to time in the form of circulars, letters, notes, etc. for better operation and safety of the machine/unit/equipment.
Page 4 User Manual About the Company ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.
Page 5 The general information which helps in performing the operations faster. The information which is significant. Care taken to avoid danger or mistakes. The statement or event that warns of something or that serves as a cautionary example. P a g e Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 6: Table Of Contents
NETWORK SETTINGS ....................................45 SERIAL COMM★ ......................................46 PC CONNECTION .....................................47 WIRELESS NETWORK ....................................48 CLOUD SERVER SETTING ..................................50 WIEGAND SETUP .....................................51 6.6.1 WIEGAND INPUT ......................................51 6.6.2 WIEGAND OUTPUT ...................................... 53 P a g e Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 7 ADD DEVICE ON THE SOFTWARE ..............................94 ADD PERSONNEL ON THE SOFTWARE ............................95 REAL-TIME MONITORING ON THE ZKBIOACCESS MTD SOFTWARE ..................95 CONNECTING TO ZKBIO TALK SOFTWARE★ ................97 CONNECTING TO ZSMART APP★ ....................100 P a g e Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 8 REQUIREMENTS OF LIVE COLLECTION AND REGISTRATION OF VISIBLE LIGHT FACE IMAGES .......... 119 REQUIREMENTS FOR VISIBLE LIGHT DIGITAL FACE IMAGE DATA ....................120 APPENDIX 2 ............................. 121 PRIVACY POLICY ....................................... 121 ECO-FRIENDLY OPERATION ..................................124 P a g e Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 9: Data Security Statement
ZKTeco, as a smart product supplier, may also need to know and collect some of your personal information in order to better assist you in using ZKTeco's goods and services, and will treat your privacy carefully by developing a Privacy Policy.
Page 11 The warranty service does not cover accidental damage, damage caused by mis-operation, and  damage due to independent installation or repair of the product by the user. P a g e | 10 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 12: Overview
SpeedFace-V5L Series support video intercom Both via mobile app ZSmart and via PC software ZKBioTalk, also they are integrated ONVIF Video protocol, so that they can connect to Onvif NVR to Video surveillance and recording.
Page 13: Standing Position, Facial Expression And Standing Posture
Recommended Standing Posture and Facial Expression  Facial Expression Standing Posture Note: Please keep your facial expression and standing posture natural while enrolment or verification. P a g e | 12 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 14: Face Registration
In such a case, you may require authenticating your face with the previously worn glasses. If your face was registered without glasses, you should authenticate your face without glasses further. P a g e | 13 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 15: Standby Interface
The punch state options can also be displayed and used directly on the standby interface. Tap  anywhere on the screen apart from the icons, and six shortcut keys appears on the screen, as shown in the figure below: P a g e | 14 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 16 Note: The punch state options are off by default and need to select other mode options in the "Punch States Options" to get the punch state options on the standby screen. P a g e | 15 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 17: Virtual Keyboard
 Tap ABC to return to the alphabetic keyboard.  Tap the input box, a virtual keyboard appears.  Tap ESC to exit the virtual keyboard.  P a g e | 16 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 18: Verification Mode
Users may verify their identities with 1:1 verification mode when they cannot gain access with 1: N authentication method. Click the button on the main screen to enter 1:1 fingerprint verification mode. Input the user ID and press OK. P a g e | 17 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 19 If the user has registered face and password in addition to his/her fingerprints and the verification method is set to Password/Fingerprint/Face verification, the following screen will appear. Select the fingerprint icon to enter fingerprint verification mode. Press the fingerprint to verify. P a g e | 18 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 21: Card Verification
Compares the card that is being put onto the card reader with the card data that related to the entered user ID. Press on the main interface and enter the 1:1 card verification mode. P a g e | 20 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 22 If an employee registers a fingerprint in addition to the card, the following screen will appear. Select the icon to enter card verification mode. Following are the display screen after putting a correct card and a wrong card respectively. P a g e | 21 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 24: Facial Verification
The following are the popups of the comparison result prompt interface. (Note: This function is only applicable to products with temperature measurement module.) P a g e | 23 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 25 When the user enables the Display Thermodynamics Figure function, the thermal image of the person is displayed in the upper left corner of the device, while verification. As shown in the images below: P a g e | 24 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 26 Enter the user ID and click OK. If an employee registers a fingerprint and password in addition to the face, the following screen will appear. Select the icon to enter face verification mode. P a g e | 25 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 27 SpeedFace-V5L Series User Manual After successful verification, the prompt box displays "Successfully Verified", as shown below: If the verification is failed, it prompts "Please adjust your position!". P a g e | 26 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 28: Password Verification
ID and press OK. If an employee registers fingerprint and face in addition to password, the following screen will appear. Select the icon to enter password verification mode. P a g e | 27 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 29 SpeedFace-V5L Series User Manual Input the password and press OK. Following are the display screen after entering a correct password and a wrong password respectively. P a g e | 28 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 30: Combined Verification
SpeedFace-V5L Series User Manual Verification is successful: Verification is failed: 2.6.5 Combined Verification To increase security, this device offers the option of using multiple forms of verification methods. P a g e | 29 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 31 For example, if a user uses Face Registration but the verification mode is Face + Password, this user will never pass verification. P a g e | 30 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 32: Main Menu
Note: When users use the product for the first time, they should operate it after setting administrator privileges. Tap User Mgt. to add an administrator or edit user permissions as a super administrator. If the P a g e | 31 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 33 SpeedFace-V5L Series User Manual product does not have an administrator setting, the system will show an administrator setting command prompt every time you enter the device menu. P a g e | 32 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 34: User Management
User Management User Registration Tap User Mgt. on the main menu. 4.1.1 Register a User ID and Name Tap New User and enter the User ID and Name. P a g e | 33 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 35: Setting The User Role
Note: If the selected user role is the Super Admin, the user must pass the identity authentication to access the main menu. The authentication is based on the authentication method(s) that the super administrator has registered. Please refer to "Verification Mode". P a g e | 34 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 36: Register Fingerprint
Click Fingerprint to enter the fingerprint registration page. Select the finger to be enrolled. Press the same finger on the fingerprint reader three times. Green indicates that the fingerprint was enrolled successfully. P a g e | 35 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 37: Register Face
4.1.4 Register Face Click Face to enter the face registration page. Please face the camera and stay still during face registration. The registration interface is as follows: P a g e | 36 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 38: Register Card Number
On the Card interface, show the QR code in front of the camera. The QR code registration will be  successful. If the QR code is registered already then the “Error! Card already enrolled.” message shows up. The  registration interface is as follows: P a g e | 37 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 39: Register Password
Tap Password to enter the password registration page. Enter a password and re-enter it. Tap OK. If the two entered passwords are different, the prompt "Password not match!" will appear. Note: The password may contain one to eight digits by default. P a g e | 38 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 40: Register User Photo
New users belong to Group 1 by default and can be reassigned to other groups. The device supports up to 99 access control groups. Click Time Period, select the time period to use. P a g e | 39 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 41: Search User
On the All Users interface, tap on the search bar on the user’s list to enter the required retrieval keyword (where the keyword may be the user ID, surname, or full name) and the system will search for the related user information. P a g e | 40 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 42: Edit User
Delete Password Only: Deletes the password information of the selected user. Delete Fingerprint Only: Deletes the Fingerprint information of the selected user. Note: If you select Delete User, all information of the user will be deleted. P a g e | 41 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 43: Display Style
Tap on User Mgt. > Display Style to choose the style of All Users interface’s list. Different display styles are shown as below: Multiple Line: Mixed Line: P a g e | 42 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 44: User Role
On the User Defined Role interface, toggle Enable Defined Role to enable or disable the user-defined role. Tap on Name and enter the custom name of the role. P a g e | 43 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 45 But if there is no super administrator registered in the device, then the device will prompt "Please enroll super admin first!" when enabling the User Role function. P a g e | 44 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 46: Communication Settings
When the device needs to communicate with a PC over the Ethernet, you need to configure network settings and ensure that the device and the PC connect to the same network segment. Tap Ethernet on the Comm. Settings interface to configure the settings. P a g e | 45 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 47: Serial Comm
Serial Comm★ Serial Comm function facilitates to establish communication with the device through a serial port (/RS485/ Master Unit). Tap Serial Comm. on the Comm. Settings interface. P a g e | 46 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 48: Pc Connection
It is the identification number of the device, which ranges between 1 and 254. Device ID If the communication method is RS232/RS485, you need to input this device ID in the software communication interface. P a g e | 47 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 49: Wireless Network
Once the Wi-Fi is turned on, the device will search for the available WIFI within the network range. Tap on the appropriate WiFi name from the available list, and input the correct password in the password interface, and then tap Connect to WIFI (OK). P a g e | 48 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 50 Note: After successfully adding the WIFI manually, follow the same process to search for the added WIFI name. Advanced Setting  On the Wireless Network interface, tap on Advanced to set the relevant parameters as required. P a g e | 49 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 51: Cloud Server Setting
The default Gateway address is 0.0.0.0. Can be modified according to the network Gateway availability. Cloud Server Setting Tap Cloud Server Setting on the Comm. Settings interface to connect with the ADMS server. P a g e | 50 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 52: Wiegand Setup
It is used to set the Wiegand input and output parameters. Tap Wiegand Setup on the Comm. Settings interface to set the Wiegand input and output parameters. 6.6.1 Wiegand Input P a g e | 51 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 54: Wiegand Output
If the verification fails, the system will send the failed ID to the device and replace Failed ID the card number or personnel ID with the new one. P a g e | 53 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 55: Network Diagnosis
Click Network Diagnosis on the Comm. Settings interface. Enter the IP address that needs to be diagnosed, and click Start the diagnostic test to check whether the network can connect to the device. P a g e | 54 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 56: System Settings
The product supports the NTP synchronization time system by default. This function takes effect after Date and Time Auto Sync is enabled and the corresponding NTP server address link is set. P a g e | 55 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 57 Note: For example, if a user sets the time of the device (18:35 on March 15, 2019) to 18:30 on January 1, 2020. After restoring the factory settings, the time of the device will remain at 18:30 on January 1, 2020. P a g e | 56 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 58: Access Logs Setting
When access logs reach its maximum capacity, the device automatically Periodic Del of Access deletes a set of old access logs. Logs Users may disable the function or set a valid value between 1 and 999. P a g e | 57 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 59: Face Parameters
The valid value ranges from 65 to 120. The higher the thresholds, the lower the misjudgement rate and the higher the rejection rate, and vice versa. It is recommended to set the default value of 75. P a g e | 58 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 60 It facilitates judging whether the captured visible image is a real person (a live Live Detection human being). The larger the value, the better the anti-spoofing performance Threshold using visible light. P a g e | 59 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 61: Fingerprint Parameters
Keep one arm distance between the device and the face. It is recommended not to move the face in a wide  range. Fingerprint Parameters Click Fingerprint on the System interface. Recommended matching thresholds High Medium Medium High P a g e | 60 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 62: Video Intercom Parameters
Always show: to display the fingerprint image on screen during enrollment and verification. None: not to display the fingerprint image. Video Intercom Parameters Click Video intercom parameters on the System interface. P a g e | 61 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 63: Security Settings
(default 60s). It does not support disabling in security mode, but it does support disabling in non-security mode. To configure, go to Personalize > User Interface > Menu Screen Timeout(s). P a g e | 62 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 64: Factory Reset
(this function does not clear registered user data). Tap Reset on the System interface and then tap OK to restore the default factory settings. P a g e | 63 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 66 The delay (s) time for triggering an external alarm. It can be set in seconds. External Alarm Delay(s)★ Users may disable the function or set a value between 1 to 255. P a g e | 65 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 67 SpeedFace-V5L Series User Manual Choose whether to update the thermal imaging temperature detection Firmware Update★ module software version. P a g e | 66 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 68: Personalize Settings
Tap Personalize on the Main Menu interface to customize interface settings, voice, bell, punch state options, and shortcut key mappings. Interface Settings Tap User Interface on the Personalize interface to customize the display style of the main interface. P a g e | 67 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 69: Voice Settings
Voice Prompt Select whether to enable voice prompts during operating. Touch Prompt Select whether to enable keypad sounds. Volume Adjust the volume of the device; valid value: 0-100. P a g e | 68 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 70: Bell Schedules
On the All Bell Schedules interface, tap on the required bell schedule, and tap Edit to edit the selected bell schedule. The editing method is the same as the operations of adding a new bell schedule. P a g e | 69 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 71: Punch States Options
It is the amount of time for which the punch state is displayed. The value Punch State Timeout (s) ranges from 5~999 seconds. To choose whether an attendance state needs to be selected during Punch State Required verification. P a g e | 70 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 72: Shortcut Keys Mappings
If the Shortcut key is set as a punch state key (such as check-in, check-out, etc.), then it is required to  set the punch state value (valid value 0~250), name, and switch time. P a g e | 71 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 73: Data Management
To delete user photo templates in the device. When deleting template Delete User Photo photos, there is a risk reminder: “Face re-registration is required after Templates an algorithm upgrade.” P a g e | 72 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 74 Selecting Delete by Time Range, you need to set a specific time range to delete all data within a specific period. Select Delete by Time Range Set the time range and click OK P a g e | 73 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 75: Access Control
In default settings, new users are allocated into the first group with the default group time zone,  where the access combo is "1" and is set in unlock state by default. P a g e | 74 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 76: Access Control Options
Normally Open: It means the door is always left open when electric power is on. Normally Closed: It means the door is always left closed when electric power is P a g e | 75 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 77: Time Schedule
 to the 24-hour clock. Tap the grey box to search the required Time Zone and specify the required Time Zone number (maximum up to 50 zones). P a g e | 76 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 78 On the selected Time Zone number interface, tap on the required day (that is Monday, Tuesday, etc.) to set the time. Specify the start and the end time, and then tap OK. P a g e | 77 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 79: Holidays
On the Holidays interface, select a holiday item to be deleted and tap Delete. Press OK to confirm the deletion. After deletion, this holiday does not display on the All Holidays interface. P a g e | 78 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 80: Combined Verification
4 consists of only three people. The first person is from AC Group 3, the second person is from AC Group 5, and the third person is from AC Group 8. Note: To delete the door-unlock combination, set all Door-unlock combinations to 0. P a g e | 79 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 81: Anti-Passback Setup
In/Out Anti-Passback: In this case, a user can check-in only if the last record is a check-out or the user can check-out only if the last record is a check-in otherwise the alarm is triggered. P a g e | 80 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 82: Duress Options Settings
1 to 999 seconds. Set the 6-digit duress password. When the user enters this duress password for Duress Password verification, an alarm signal will be generated. P a g e | 81 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 83: Attendance Search
2. Select the time range in which the records need to be searched. you want to search for records of all users, tap OK without entering any user ID. P a g e | 82 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 84 3. Once the record search completes. Tap the 4. The below figure shows the details of the record highlighted in green to view its details. selected record. P a g e | 83 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 85: Autotest
To test the RTC. The device tests whether the clock works normally and accurately Test Clock RTC with a stopwatch. Touch the screen to start counting and press it again to stop counting. P a g e | 84 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 86: System Information
U disc export. Note: The current privacy policy's text is only available in Simplified Chinese/English. However, translation of other multi-language content is underway, with more iterations. P a g e | 85 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 87: Lan Video Intercom Function Settings
Double-click on the provided ZKBioVMSPlugin_sqlite.exe file to install the ZKBio VMS Plugin. Note: The ZKBioSecurity software and ZKBio VMS Plugin need to be opened simultaneously to recognize the intercom function. P a g e | 86 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 88: Configuration Parameters
The username and the initial password are both admin. Note: When the Video-VMS plugin is connected successfully to the ZKBioSecurity, the password changes synchronously to the admin user password of the ZKBioSecurity. P a g e | 87 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 89 Server Address: Enter the ZKBioSecurity installation IP address. Server Port: The port is the service port set during installation (not the ADMS port). P a g e | 88 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 90 SpeedFace-V5L Series User Manual Adding device on the ZKBioSecurity software Click Access > Device > Device > Search to add the device on the ZKBioSecurity software. P a g e | 89 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 91: Video Preview On The Zkbiosecurity Software
Note: If the device is not added to the Video module, please check whether the parameter settings are correct. Video Preview on the ZKBioSecurity Software Click Video > Real-Time Monitoring > Video Preview to enter the preview interface of the device. P a g e | 90 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 92: Make A Call On The Device
The server page pops up the call window by default, as shown in the following figure. Call Interface In-call Interface P a g e | 91 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 93 It is the Remote Open key, used to open the door remotely. The default lock drive time is 5 seconds. Note: If the device preview interface is opened on the ZKBioSecurity software, the call interface will no longer be displayed in this call window. P a g e | 92 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 94: Connect To Zkbioaccess Mtd Software
Software Side  Login to ZKBioAccess MTD software, click System > Communication > Communication Monitor to set the ADMS service port, as shown in the figure below: P a g e | 93 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 95: Add Device On The Software
Click Add in operation column, a new window will pop-up. Select Icon type, Area, and Add to Level from each dropdown and click OK to add the device. P a g e | 94 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 96: Add Personnel On The Software
Real-time monitoring on the ZKBioAccess MTD Software Click Prevention > Epidemic > Temperature Detection > Real-time monitoring to view all the personnel's events present under the Abnormal Temperature, No Masks, and Normal Records. P a g e | 95 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 97 Also, detailed information of the personnel can be seen on the right by clicking on the particular category on the pie-chart. Note: For other specific operations, please refer to ZKBioAccess MTD User Manual. P a g e | 96 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 98: Connecting To Zkbio Talk Software
ZKBio Talk software. When the device-side video intercom parameters are set correctly, the device automatically pushes the device list on the left, as shown in following figure. P a g e | 97 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 99 When a user clicks icon on the main interface of the device to make a call, the software interface displays the IP address of the calling device in yellow. P a g e | 98 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 100 This is the Remote open key, used to open the door remotely. The default lock drive time is 5 seconds Note: Only the offline devices can be removed. P a g e | 99 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 101: Connecting To Zsmart App
Tap on System > Video Intercom Parameters > QR Code Binding to show the QR code of the device. Click the icon in the upper right corner. P a g e | 100 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 103: Video Phone Connection
Click to open the door remotely. The unlocking record is saved in Me > Message Unlock Center. Note: For other specific operations, please refer to the ZSmartAPP User Manual. P a g e | 102 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 104: Connecting To Sip
Enter the server address. Server Port Enter the server port. User Name Enter the Username of server. Password Enter the password of server. realm Enter the realm of server. P a g e | 103 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 105: Local Area Network Use
Once the indoor station is configured with the network, the video intercom function can be realized by tap icon on the SpeedFace-V5L screen and entering the IP address of the indoor station in the jumping interface. P a g e | 104 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 106 Custom the Punch Status Options  Use your browser to enter the address to log into WebSever, the address is the Serial IP Address:1443, for example: //192.168.163.99:1443. https: P a g e | 105 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 107 SpeedFace-V5L Series User Manual Enter the WebSever account and password, the initial account is: admin, password: admin@123. P a g e | 106 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 108 Dialing Number: Customize the number of the indoor station, you can enter the value on SpeedFace-V5L to call the indoor station quickly for video intercom. Once the form is set up and saved, upload the configuration form in WebSever. P a g e | 107 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 109 SpeedFace-V5L to call the indoor station quickly for video intercom. After entering the dialing number, the corresponding IP address in IP Address the configuration data will be automatically paired. P a g e | 108 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 110 You can then tap 199 on the punch status options to directly implement the video intercom. Device Number  Enter the device number in the call screen. P a g e | 109 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 111: Sip Server
Once the SIP is set up correctly, a green dot will appear in the upper right corner of the call page to indicate that the SpeedFace-V5L is connected to the server. You can call the account name of the indoor station. P a g e | 110 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 112 SpeedFace-V5L Series User Manual For details on the operation and use of the indoor station, please refer to the indoor station user manual. P a g e | 111 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 113: Connecting To Bluetooth Lock
Select the Bluetooth lock to be bound, enter the lock password setting interface.  Please enter a 6 to 9 digit new password, click Confirm to save the password, then the interface will  display "Unbound" after completion. P a g e | 112 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 114 Please touch the Bluetooth lock keyboard to wake up the device first, and then click Linking Device,  the Bluetooth lock will emit a beep sound, and the interface will pop up a "Linked" prompt, indicating that the device is successfully bound. P a g e | 113 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 115: Change Password
Tap on Comm. > Bluetooth Settings, select the bound Bluetooth lock, and enter the Details  interface. Click Lock Password to open the password setting interface, enter the new password twice, and click  OK to save. P a g e | 114 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 116 Password to synchronize the new password to the Bluetooth lock. The Bluetooth lock will emit a beep sound, and the device interface will pop up a "Successfully set up." prompt, indicating that the device is successfully set. P a g e | 115 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 117: Delete Password
Please touch the Bluetooth lock keyboard to wake up the device first, and then click Unlink Device on  the Details interface. The interface will pop up a “Are you sure to unlink the device?” prompt, then click OK. P a g e | 116 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 119: Unlock
After verification, the interface pops up an "Unlocking via Bluetooth" prompt, and the lock is opened after 5 seconds. P a g e | 118 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 120: Requirements Of Live Collection And Registration Of Visible Light Face Images
Do not include more than one face in the capturing area. A distance of 50cm to 80cm is recommended for capturing the image. (the distance is adjustable, subject to body height). P a g e | 119 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 121: Requirements For Visible Light Digital Face Image Data
The captured person should be easily visible, natural in color, no harsh shadow or light spot or reflection in the face or background. The contrast and lightness level should be appropriate. P a g e | 120 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 122: Privacy Policy
Privacy Policy Notice: To help you better use the products and services of ZKTeco and its affiliates, hereinafter referred as "we", "our", or "us", the smart service provider, we consistently collect your personal information. Since we understand the importance of your personal information, we took your privacy sincerely and we have formulated this privacy policy to protect your personal information.
Page 123 Upon noticing that we have collected personal information of minors without the prior consent from verifiable parents, we will delete such information as soon as possible. P a g e | 122 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 125: Eco-Friendly Operation
The components which contain toxins or harmful elements are included due to the current economic or technical limitations which prevent their replacement with non-toxic materials or elements. P a g e | 124 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 126 ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 : +86 755 - 89602394 www.zkteco.com Copyright © 2022 ZKTECO CO., LTD. All Rights Reserved.

ZKTeco SpeedFace-V5L Series User Manual

Quick Links

Related Manuals for ZKTeco SpeedFace-V5L Series

Summary of Contents for ZKTeco SpeedFace-V5L Series

Table of Contents