Specifications - Yaesu FTDX-9000D Operation Manual

Receiver
Circuit Type:
Intermediate Frequencies:
Sensitivity (IPO "OFF"):
Selectivity (–6/–66 dB):
Image Rejection:
Maximum Audio Output:
Audio Output Impedance:
Specifications are subject to change, in the interest of technical improvement, without notice or obligation, and are
guaranteed only within the amateur bands.
FT 9000D O
Triple-conversion superheterodyne
VFO-A; 40.455 MHz/455 kHz/30 kHz (24 kHz for FM),
VFO-B; 40.455 MHz/450 kHz/30 kHz (24 kHz for FM)
SSB (2.4 kHz, 10 dB S+N/N)
0.2 µV (160 - 10 m Amateur bands)
0.125 µV (6 m Amateur band)
2 µV (0.1 - 50 MHz)
AM (6 kHz, 10 dB S+N/N, 30 % modulation@400 Hz)
3.2 µV (0.1 - 1.8 MHz)
2 µV (1.8 - 30 MHz)
1 µV (6 m Amateur band)
FM (12 dB SINAD)
0.5 µV (10 m Amateur band)
0.35 µV (6 m Amateur band)
Mode
CW/RTTY/PKT
SSB
AM
FM
(WIDTH: Center, VRF/µ-TUNE: OFF)
70 dB or better (160 - 10m Amateur bands)
2.5 W into 4 Ω with 10% THD
4 to 8 Ω (4 Ω: nominal)
M
S
–6 dB
0.5 kHz or better
2.4 kHz or better
9 kHz or better
15 kHz or better
–66 dB
750 Hz or less
3.6 kHz or less
18 kHz or less
25 kHz or less
Page 149