Yaesu FTDX-9000D Operation Manual page 139

MODE-DAT G
053. DATA IN SELECT
Function: Selects the data input to be used on the
PKT mode.
Available Values: DATA/PC
Default Setting: DATA
DATA:Uses the data input line which is connected to
the rear panel's PACKET jack while using the
PKT mode.
PC: Uses the data input line which is connected to
the rear panel's AUDIO IN jack while using the
PKT mode.
054. DATA GAIN
Function: Sets the data input level from the TNC to
the AFSK modulator.
Available Values: 0 ~ 255
Default Setting: 128
055. DATA OUT
Function: Selects the receiver to be connected to
the data output port (pin 4) of the PACKET jack.
Available Values: VFO-a/VFO-b
Default Setting: VFO-a
056. DATA VOX DELAY
Function: Adjusts the "VOX" delay (receiver recov-
ery) time on the PKT mode.
Available Values: 30 ~ 3000 msec
Default Setting: 300 msec
057. DATA VOX GAIN
Function: Adjusts the "VOX" gain on the PKT mode.
Available Values: 0 ~ 255
Default Setting: 128
FT 9000D O M
M
MODE-FM G
058. FM MIC GAIN
Function: Sets the microphone gain for the FM mode.
Available Values: MCVR/0 ~ 255 (FIX)
Default Setting: 160
When this menu is set to "MCVR," you may adjust
the microphone gain using the front panel's MIC knob.
059. FM MIC SELECT
Function: Selects the microphone to be used on the
FM mode.
Available Values: FRONT/REAR/DATA/PC
Default Setting: FRONT
FRONT: Selects the microphone connected to the
front panel's MIC jack while using the FM
mode.
REAR: Selects the microphone connected to the
rear panel's MIC jack while using the FM
mode.
DATA: Selects the microphone connected to pin 1
of the PACKET Jack while using the FM
mode.
PC: Selects the microphone connected to the
rear panel's AUDIO IN 3.5-mm jack while
using the FM mode.
060. RPT SHIFT 28MHz
Function: Sets the magnitude of the repeater shift
on the 28 MHz band.
Available Values: 0 ~ 1000 kHz
Default Setting: 100 kHz
061. RPT SHIFT 50MHz
Function: Sets the magnitude of the repeater shift
on the 50 MHz band.
Available Values: 0 ~ 4000 kHz
Default Setting: 1000 kHz
SHARP
MEDIUM
WIDE
F
SHARP
F
M
P
SOFT
S
Page 137