Changing The Battery Pack - Xact XG2201 Instruction Manual

Changing the BATTERY PACK

Changing the Battery Pack
The BATTERY PACK provides power for the HANDSET of your cordless telephone.
To Replace BATTERY PACK:
1. Remove the HANDSET BATTERY COMPARTMENT COVER by sliding it down.
2. Pull out the BATTERY PACK PLUG and remove the BATTERY PACK.
3. Plug the new BATTERY PACK into the BATTERY CONNECTOR.
4. Slide the HANDSET BATTERY COMPARTMENT COVER firmly into place in its closed position.
5. Before use, charge the new BATTERY PACK for 12 hours.
ATTENTION:
The telephone that you have purchased contains a rechargeable BATTERY PACK. The BATTERY PACK is recyclable. At the end
of its useful life, under various state and local laws, it may be illegal to dispose of this BATTERY PACK into the municipal waste
stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal.
In order to get maximum life from the HANDSET BATTERY PACK, be sure to
charge the HANDSET for 12 hours before initial use.
BATTERY PACK
BATTERY
CONNECTOR
BATTERY PACK
CAUTION
TO REDUCE RISK OF
PLUG
FIRE OR INJURY, USE
ONLY SAME TYPE AND
MAKE OF
BATTERY PACK,
Ni-Mh 3.6V, 600mAh,
XACT
MODEL B655
FOR 2.4 GHz
HANDSET
IMPORTANT
30
BATTERY
COMPARTMENT
COVER