Cordless Telephone Operation
NOTE:
1. The Call Timer will start to count once you press the
2. The LCD Screen emits light for 5 seconds every time you press any button on the HANDSET.
3. When "CALLS" appears on the LCD Screen, it means that the HANDSET is OFF-HOOK (connected to the telephone line).
Placing Calls
button, the Call Timer starts to count. The HANDSET LCD Screen will display
1. Press the
TALK
"CALLS", and "TALKING", and the BASE UNIT IN USE LED indicator will light up.
2. Listen for a dial tone.
3. Dial the phone number.
4. When you have finished with your call, press the
the BASE UNIT.
OR
1. Dial the phone number.
2. Press and hold down the DIAL 7
BASE UNIT IN USE LED indicator will light up.
3. When you have finished with your call, press the
the BASE UNIT.
In order to utilize the Caller ID feature, you must subscribe to Caller ID service
button.
TALK
Minute
CALLS
00
1
14
MIN
SEC
button again or place the HANDSET on
TALK
*
or the DIAL 10
0
10
7
OPER
button again or place the HANDSET on
TALK
IMPORTANT
from your local telephone company.
12
Seconds
Channel
or the DIAL 1+
button. The
#
1+