Telephone Keypad Characters - Xact XG2201 Instruction Manual

Caller ID System Operation

Telephone Keypad Characters

The TELEPHONE KEYPAD
entering names. Press the appropriate TELEPHONE KEYPAD button to get the right
characters.
EXAMPLE:
If you want to enter the characters "ACE" on the HANDSET LCD Screen.
1. Press the button. The LCD Screen will display "DIRECTORY".
DIR
2. Press the button.
EDIT
3. Press the TELEPHONE KEYPAD
RIGHT button to move the cursor to the right to enter the next character (See
NOTES below.).
4. Press the TELEPHONE KEYPAD
5. Press the TELEPHONE KEYPAD
NOTES:
1. To enter the next character, press the appropriate button. If, however, the next character
is on the same button as the previous character, you will first need to press the SHIFT
RIGHT button. Pressing the SHIFT RIGHT
a space.
2. If you want to change any character, you can go back to the incorrect character by
pressing the SHIFT LEFT
press the button.
DELETE
SCAN
3. You can store a maximum of 15 characters on the letter icon.
4. You can store a maximum of 16 digits on the number icon.
~ buttons are used to enter characters when
0 9
10
OPER WXY
button, "A" will be displayed. Press the SHIFT
2
ABC
button three times to display "C".
2
ABC
button two times to display "E".
3
DEF
button a second time will produce
button. To delete the character inside the cursor " ",
27
KEYPAD
CHARACTERS
BUTTONS
SPACE & ' ( ) * . 1
1
A B C 2
2
3 D E F 3
4 G H I 4
5 J K L 5
6 M N O 6
P Q R S 7
7
8 T U V 8
9 W X Y Z 9
* *
0 0
# #