Cordless Telephone Operation; Preparing For Use; No Line Indicator; Receiving Calls - Xact XG2201 Instruction Manual

Cordless Telephone Operation

Preparing for Use

Before you can use your cordless telephone, you must charge the HANDSET for 12 hours. Failure to do so will require recharging
of the BATTERY PACK more often.
1. Place the HANDSET on the BASE UNIT for 12 hours.
2. After 12 hours, remove the HANDSET from the BASE UNIT.
Before you can use your cordless telephone, you must charge the HANDSET for 12 hours. Failure to do so will require
more frequent charging of the BATTERY PACK. See page 29 for more information on the BATTERY PACK.
NOTE:
Depending on the frequency of use, once the HANDSET is fully charged, it remains functional for approximately 4 hours of
continuous use and approximately 5 days when the HANDSET is off the BASE UNIT in STANDBY mode.

NO LINE Indicator

This telephone checks for an active TELEPHONE LINE connection. If "NO LINE" appears on
the LCD Screen, when the HANDSET is in STANDBY mode, no calls can be made or received
from this telephone. Check that the TELEPHONE LINE CORD plugs are connected to the wall
TELEPHONE JACK and the BASE UNIT TELEPHONE LINE CONNECTION JACK. If "NO
LINE" continues to be displayed, check that the other phones in the house are working. If none
of the phones work, contact your local phone company.

Receiving Calls

1. When the phone rings, lift the HANDSET and press the
Screen will display "CALLS" and "TALKING", and the BASE UNIT IN USE LED indicator
will light up.
2. Start your conversation.
3. To end your conversation, either press the
BASE UNIT. If you place the HANDSET on the BASE UNIT CHARGE CRADLE, you
activate the automatic STANDBY feature.
button. The HANDSET LCD
TALK
button or place the HANDSET on the
TALK
11
NO LINE