Editing A Name And Number In The Directory - Xact XG2201 Instruction Manual

Caller ID System Operation

Editing a Name and Number in the DIRECTORY

1. Press the button. The LCD Screen will display "DIRECTORY".
DIR
2. Press the SCROLL UP
3. Press the button to edit the name, and the cursor will blink over the first character.
EDIT
4. Press the SHIFT LEFT
erase, press the
DELETE
SCAN
5. Press the SCROLL UP
6. Press the SCROLL LEFT
the button. To add, use the TELEPHONE KEYPAD
DELETE
SCAN
7. Press and hold down the
IMPORTANT: It is not advisable to save a telephone number without the corresponding name in the DIRECTORY. This will
lead to improper displays on PRIVATE and OUT OF AREA calls.
NOTE: When no active buttons are pressed for 20 seconds, the LCD Screen will automatically return to STANDBY mode.
or DOWN button to find the record you want to edit.
MICHAEL BROW
6 0 4 - 5 5 5 - 1 2 1 2
#
MICHAEL BROW
6 0 4 - 5 5 5 - 1 2 1 2
#
or RIGHT button to move the cursor to the letter or number you want to change. To
button. To add, use the TELEPHONE KEYPAD
or DOWN button to edit the number.
or RIGHT button to move the cursor to the digit you want to change. To erase, press
MICHAEL BROW
6 0 4 5 5 5 1 2 1 2
#
button to confirm.
RE/PA
SAVE
DIR
8 12
TOTAL
DIR
cursor is blinking
8 12
TOTAL
0
10
OPER
~ buttons. (See page 27 for details.)
0 9
10
OPER WXY
DIR
cursor is blinking
6
8 12
TOTAL
19
~ buttons. (See page 27 for details.)
9
WXY