Wall Mounting - Xact XG2201 Instruction Manual

Wall Mounting

Wall Mounting
You may choose to put the BASE UNIT of your cordless telephone on a wall.
1. With the back of the BASE UNIT facing up, insert the hooks of the MOUNTING BRACKET into the matching slots on the back
of the BASE UNIT (positioning the mounting bracket as shown in Figure 1.)
2. Insert the small plug on the end of the AC ADAPTER into the POWER-IN CONNECTION JACK at the back of the BASE UNIT
and put the AC ADAPTER CORD inside the MOLDED WIRING CHANNEL as shown in Figure 2.
3. Plug the AC ADAPTER into a 120V wall outlet.
4. Connect the SHORT TELEPHONE LINE CORD to the TELEPHONE LINE CONNECTION JACK. Put the SHORT
TELEPHONE LINE CORD inside the top half of the other MOLDED WIRING CHANNEL as shown in Figure 2.
5. Plug the free end of the SHORT TELEPHONE LINE CORD into the MODULAR WALL JACK.
TELEPHONE LINE
CONNECTION JACK
MOUNTING
BRACKET
FIGURE 1
BASE UNIT
9
SHORT TELEPHONE
LINE CORD
WALL PLATE
STUD
MODULAR
WALL JACK
WALL PLATE
BASE UNIT
FIGURE 2