Hypercom ICE Series Troubleshooting Manual page 37

Performing a Card Reader Test
Use this function to enable the card reader test and to display track 1 and track 2 data.
N :
You can also access this function by Merchant Functions, 8, 9, and pressing or touching Enter.
OTE
Step-by-Step
To perform a card reader test:
Step Action
Touch Press Here for Menu on the terminal display.
1
N
OTE
Touch Tests on the terminal display.
2
Touch Card Reader on the terminal display.
3
4 Slide the card through the card reader. The terminal displays
track 1 and track 2 information, the card number, and the
expiration date.
n
The card number is xxxxxxxxxxxxxxxx.
n
The expiration date is xxxx.
N : If the terminal displays Card Error, swipe the card again.
OTE
If the error message is repeated, clean the card reader
track using a card reader cleaning card. If the error
message persists, the customer card or terminal card
reader may be damaged.
Touch Clear on the terminal display. The terminal displays the
5
Idle prompt.
940331-002, rev. A
Download from Www.Somanuals.com. All Manuals Search And Download.
:
The Idle prompt may vary depending on the
terminal and its configuration.
If the option you want is not on this screen,
touch + on the terminal display for additional
menu options.
Hypercom Corporation
Equipment Information
Terminal response
0$,1 Ï  ;
1HZ 7UDQV
5HSRUWV 7HUPLQDO
&DVKLHU
6HWXS
7(676 Ï
+RVW 'LVSOD\
.H\ERDUG 3,1 3DG
3ULQWHU &DUG 5HDGHU
6PDUW &DUG
5($' &$5' 12:
;;;;;;;;;;;;;;;; ;;;
;;;;
%DWFK
7DE
7HVWV
;
;
1-25