Vivotek IP7161 User Manual page 156

VIVOTEK
Syntax:
http://<servername>/cgi-bin/operator/uartchannel.cgi?[channel=<value>]
-------------------------------------------------------------------------
GET /cgi-bin/operator/uartchannel.cgi?[channel=<value>]
x-sessioncookie: string[22]
accept: application/x-vvtk-tunnelled
pragma: no-cache
cache-control: no-cache
-------------------------------------------------------------------------
POST /cgi-bin/operator/uartchannel.cgi
x-sessioncookie: string[22]
content-type: application/x-vvtk-tunnelled
pragma : no-cache
cache-control : no-cache
content-length: 32767
expires: Sun, 9 Jam 1972 00:00:00 GMT
User must use GET and POST to establish two channels for downstream and upstream. The x-sessioncookie
in the GET and POST should be the same to be recognized as a pair for one session. The contents of
upstream should be base64 encoded to be able to pass through some proxy server.
This channel will help to transfer the raw data of UART over network.
PARAMETER VALUE
channel 0 ~ (n-1)
Event/Control HTTP tunnel channel
Note: This request requires
Method: GET and POST
Syntax:
http://<servername>/cgi-bin/admin/ctrlevent.cgi
-------------------------------------------------------------------------
GET /cgi-bin/admin/ctrlevent.cgi
156 - User's Manual
DESCRIPTION
The channel number of UART.
admin privilege