Vivotek IP7161 User Manual page 133

Network camera
Table of Contents

Advertisement

eptz
<positive integer>
protocol_https
<boolean>
protocol_rtsp
<boolean>
protocol_sip
<boolean>
protocol_maxconn
<positive integer>
ection
protocol_rtp_multi
<boolean>
cast_
scalable
protocol_rtp_multi
<boolean>
cast_
backchannel
protocol_rtp_tcp
<boolean>
protocol_rtp_http
<boolean>
protocol_spush_m
<boolean>
jpeg
protocol_snmp
<boolean>
protocol_ipv6
<boolean>
videoin_type
0, 1, 2
videoin_resolution
<a list of the
available resolution
separates by comma)
videoin_maxframe
<a list of the
rate
available max frame
rate separates by
comma>
Bit 9 => Reserved bit; Invalidate lens_pan,
Lens_tilt, lens_zoon, lens_focus, len_iris.
0(fields are valid),
1(fields are invalid)
0/7
A 32-bit integer, each bit can be set separately
as follows:
Bit 0 => stream 1 supports ePTZ or not.
Bit 1 => stream 2 supports ePTZ or not.
The rest may be deduced by analogy
0/7
indicate whether to support http over SSL
0/7
indicate whether to support rtsp
0/7
indicate whether to support sip
0/7
The maximum allowed simultaneous
connections
0/7
indicate whether to support scalable multicast
0/7
indicate whether to support backchannel
multicast
0/7
indicate whether to support rtp over tcp
0/7
indicate whether to support rtp over http
0/7
indicate whether to support server push
motion jpeg
0/7
indicate whether to support snmp
0/7
indicate whether to support ipv6
0/7
0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS
0/7
available resolutions list
0/7
available framerate at the videoin_resolution
list index
VIVOTEK
User's Manual - 133

Advertisement

Table of Contents
loading

Table of Contents