Vivotek IP7161 User Manual page 112

VIVOTEK
daylight_enable
daylight_dstactual
mode
daylight_auto_beg
intime
daylight_auto_end
time
updateinterval
restore
reset
restoreexceptnet
112 - User's Manual
<boolean>
<boolean>
string[19]
string[19]
0,
3600,
86400,
604800,
2592000
0,
<positive integer>
0,
<positive integer>
<Any value>
320: GMT 08:00 Beijing, Chongging, Hong
Kong, Kuala Lumpur, Singapore, Taipei
360: GMT 09:00 Osaka, Sapporo, Tokyo,
Seoul, Yakutsk
380: GMT 09:30 Adelaide, Darwin
400: GMT 10:00 Brisbane, Canberra,
Melbourne, Sydney, Guam, Vladivostok
440: GMT 11:00 Magadan, Solomon Is.,
New Caledonia
480: GMT 12:00 Aucklan, Wellington, Fiji,
Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
6/6 enable automatic
zone
6/7 check if current time is under daylight
saving time.
6/7 display the current daylight saving begin
time.
(product dependent)
6/7 display the current daylight saving end
time.
(product dependent)
6/6 0 to Disable automatic time adjustment,
otherwise, it means the seconds between
NTP automatic update interval.
7/6 Restore the system parameters to default
value after <value> seconds.
7/6 Restart the server after <value> seconds if
<value> is non-negative.
7/6 Restore the system parameters to default
value except (ipaddress, subnet, router,
dns1, dns2, pppoe).
This command can cooperate with other
"restoreexceptXYZ" commands. When
cooperating with others, the system
daylight saving to time