Advertisement
number when found. If the instrument cannot be found, it is possible to check
the assigned port number from the Control Panel - Device Manager - Ports
(COM&LPT).
be detected. In this case, assign a port number between 1 and 16.
•
Click the Transfer Files button to start copying all files found in the instrument
to the computer. The files stored in the instrument are not modified in any way
by this process.
10.2.3 USB Key File Transfer
The USB key method allows to transfer up to 400 files (maximal storage is 400 files).
The USB key must be formatted with FAT standards.
•
Connect the provided USB key to the instrument's type A USB port.
•
On the CTT instrument, press the menu key
•
Select USB Key - Check USB Memory.
•
The instrument will test the USB key to confirm compatibility.
•
Press the menu key
reports will be copied on the USB key. The files stored in the instrument are not
modified in any way by this process.
•
Connect the USB key to a PC computer to access the files.
C T T
S e r i e s
If the assigned port is higher than 16, the instrument might not
, select USB Key, and then select Export Files. All test
-
U s e r
M a n u a l
.
44
Advertisement
Need help?
Do you have a question about the CTT Series and is the answer not in the manual?