NDB Technologies CTT Series User Manual page 4

2.2 Safety Precautions
• Stand clear of all parts of the high-voltage circuit, including all connections,
unless the device under test is de-energized.
• CTT assembly and live line tool adapters shall be considered non-insulating.
• Keep other people away from test activities with barricades or warnings.
• Treat all terminals of high-voltage power equipment as potential electric shock
hazards. Voltages may be induced at these terminals because of proximity to
energized high-voltage lines or equipment.
• Do not use the CTT in an area with risks of explosion.
• Wearing rubber gloves is recommended as a routine safety precaution
whenever working with the test set.
• Maintenance must be performed by qualified personnel who is familiar with
the instrument maintenance, operation and involved hazards. This equipment
should be used only by qualified employees, trained in and familiar with the
local applicable safety-related work practices, safety rules and other safety
requirements associated with the use of this type of equipment.
• These instructions are not intended as a substitute for appropriate work
practice training, nor do they cover all details or situations which could be
encountered when operating this type of equipment.
• A failure to respect safety precautions could permanently damage the
instrument, cause injuries or death.
• Even with all efforts invested in making a safe instrument, it is not possible
to remove all potential injury or death risks regarding the use and/or
maintenance of this equipment. Also risks of electrocution is inherent in or
around high voltage environments and these risks cannot be controlled by ndb
Technologies.
• Safety is the user's responsibility. In no event shall ndb Technologies be liable
for any direct, indirect, punitive, incidental, special consequential damages, to
property or life, whatsoever arising out of or connected with the use or misuse
of it's products.
• Use genuine ndb Technologies accessories to ensure system safety and reliable
operation. The use of other parts is not permitted and invalidates the warranty.
• Avoid hitting, throwing, crushing, puncturing or bending the instrument.
• Avoid using the CTT in salt fog environments.
C T T S e r i e s - U s e r M a n u a l
4