Setting The Tray Selection - Sharp AR-FX9 - Fax Interface Card Facsimile Manual

INITIAL SETTINGS

SETTING THE TRAY SELECTION

(when the 250-sheet paper feed unit is installed)
Follow the steps below to select the paper tray for received faxes.
1
Press the [MENU] key.
1,2,3,
1,2,3,
2
Press the [ ] key (
until "4:USER PROGRAM" appears,
and then press the [OK] key.
Selection
"4:USER PROGRAM"
3
Press the [ ] key (
until "24:TRAY SELECTION" appears,
and then press the [OK] key.
Selection
"24:TRAY SELECTION"
4
Press the [ ] key (
to select the tray selection.
1,2,3,
1,2,3,
5
Press the [OK] key.
1,2,3,
1,2,3,
30
) or [ ] key (
) or [ ] key (
) or [ ] key (
The selections are as
follows:
1:AUTO
2:TRAY 1
3:TRAY 2
6
Press the [MENU] key.
1,2,3,
1,2,3,
)
)
)
Press the [MENU] key to
exit.