Sharp AR-FX9 - Fax Interface Card Facsimile Manual page 17

7
1,2,3, É
1,2,3, É
SP. FUNC
22
[REPORT] key
15
Press this key to print out a report of a fax
transaction and also when receiving a confidential
fax.
[SPEAKER] key
16
Press this key to begin manual dialing. (To close
the line, press the [SPEAKER] key again.)
Please refer to "PBX function" for details about the
R-key function.
[2-SIDED TX] key )
17
Press this key to fax a two-sided original.
[MODE SELECT] key / Mode indicators
18
Press this key to select the mode. The indicator of
the selected mode lights (copy, printer, scanner,
fax mode indicators).
SPF/RSPF indicator
19
This lights up when an original is placed in the
SPF/RSPF.
Error indicator
20
This lights steadily or blinks when a paper misfeed
or other error occurs.
Tray location indicator
21
Indicates the selected paper tray. The indicator
blinks when the tray is out of paper or is not closed.
[MENU] key
22
Press this key to configure a user program.
ZOOM
23 24 25 26
8 9
27 28
[ ] key ( ), [ ] key (
23
Press the [ ] key (
select an item in a function setting menu.
Press the [OK] key to enter a selection.
[ ] key
24
Press this key to enter symbols during a name
storing procedure.
Press the " " key to change from pulse dialing to
tone dialing mode.
Numeric keys
25
Press these keys to dial numbers, and enter
numbers and letters during number/name storing
procedures.
[#] key
26
Press this key to enter symbols during a name
storing procedure. The [#] key scrolls through
symbols in the opposite direction of the [ ] key.
When dialing, press this key after you are finished
scanning originals into memory from the document
glass.
[START] key ( )/ indicator
27
Used for the following:
• To begin sending a fax.
• Reading an original into memory from the
document glass.
• Manually receiving a fax.
• Entering and setting information.
Power save indicator
28
This lights up when the power save function is
activated.
INITIAL SETTINGS
), [OK] key
) or [ ] key ( ) to
15
2